|
|
|
|
|
#1
04-17-2010, 09:32 AM
|
|||||
|
|||||
Setup looks great Kien. Great pics and explanations of everything too. Both tanks are amazing. Looks like you are wearing scrubs in the one pic. Work at a hospital?
|
|
#2
04-18-2010, 02:33 AM
|
|||||
|
|||||
|
He he, thats what I was going to ask as my wife is an RN
 Quote:
__________________
Mike 150g reef, 55g sump, T5's, Vertech 200A, Profilux III - German made is highly over rated, should just say Gerpan made. Reefkeeper - individual obsessed with placing disturbing amounts of electricity and seawater in close proximity for the purpose of maintaining live coral reef organisms.
|
|
#3
04-18-2010, 04:46 AM
|
|||||
|
|||||
|
Looking Incredible Kien!
 I think the rockscape is very neat! A stellar build, as if we would expect anything but from you!
__________________
Red Coral Online Store  www.redcoralaquarium.net 45 Gallon Cube with 10 Gallon Sump, Lighting 8 bulb T5, Vertex IN 80 Skimmer -2 Occelaris Clowns, Engineer Goby, RBTA, Peppermint Shrimp
|
|
#5
04-19-2010, 09:38 AM
|
|||||
|
|||||
|
Thanks everyone! And yes, those are hospital scrubs I'm wearing :-)
So this evening I finally got around to plugging in the Bubble Magus. I had assembled it on Friday but didn't have a chance to actually start using it until today. Luckily I have plenty of room in the sump to wrestle that beast in. Here he is busy skimming away.  So when I plugged the Magus in I decided to clean out and replace my carbon. This process took about 20 minutes plus another 10 minutes of cleaning up. After I reinstalled the carbon reactors I took a peek at Mr. Magus to see what he was up to. I was quite shocked at what I saw. This is 30 minutes worth of skimming..  Fish poop on the walls of my brand new shiny skimmer cup!  I am officially a Bubble Magus fan boy!  Mmmm.. seafoam.. 
|
|
#7
04-23-2010, 10:16 PM
|
|||||
|
|||||
|
Today I decided to top up my NP BioPellets and while I was at it, I figured I'd re-plumb the reactor. The reactor, although performs beautifully, is kind of awkward to plumb. Currently I have a crap load of hose adapters to go from my MaxiJet 1200 into the Vertex with hose snaking through the sump. Not a very clean setup but got the job done.
Instead of flex hose all over the place I decided to use rigid 1/2" PVC and cemented all the pieces together. I also wanted to minimize the footprint of the whole rig so it took a little playing around with. I also wanted to increase the input so I threw a bigger pump at it. Utilizing this cheap-o 500gph pump from Odyssea.  Here's what I ended up with..      here she is in the sump.  Even with all of those 90 degree bends I still have to throttle back (about 1/4 turn) the input or the pellets get blasted through the outlet. Also, as you can see here the outlet drops right in front of the inlet to the skimmer.  and here is my new full sump shot.  Last edited by kien; 04-23-2010 at 10:27 PM.
|
|
#8
04-23-2010, 10:18 PM
|
|||||
|
|||||
|
Quote:
 yummy!
|
Hybrid Mode
