kien's 150g Room Divider Mixed Reef & Stuff

[andestang]

Ya I heard about the free install from Aqua-Digital, but I'll tackle my own. Thanks for the heads up on the few unnoted details. Forgot to ask, what epoxy are you using for you rock work - Aquascape Milliput Epoxy ?

[kien]

Originally Posted by andestang

Ya I heard about the free install from Aqua-Digital, but I'll tackle my own. Thanks for the heads up on the few unnoted details. Forgot to ask, what epoxy are you using for you rock work - Aquascape Milliput Epoxy ?

while you've got that bad boy open, make note of what USB chipset you have on there. It is the chip on the USB controller/port. If you want to install the windows usb driver you'll need the chipset, there are two different ones. I had to open up my box a second when I found out I needed this info. If you need to flash your firmware with the flasher program (like I did), you'll also need to know which microcontroller you've got in there. The flasher program lists a crap load of them and I had to do some searching to figure out which one I had.. I could not for the life of me get the box to flash via USB or ethernet, had to use the serial port and a USB to Serial convert because I have no computers in the house with a serial port. I also had troubles connecting to the P3 upgrade with the latest ProfiluxControl software. I had to flash the firmware to the latest in order to use ProfiluxControl.

I use Tailor Aquatics Epoxy. Seems to be the only kind LFS in calgary (at least the ones I visit) seem to carry.

[Red Coral Aquariums]

Originally Posted by kien

I use Tailor Aquatics Epoxy. Seems to be the only kind LFS in calgary (at least the ones I visit) seem to carry.

We also carry the D+D Aquascape Epoxy.
Out of 10 Epoxy sales 6 are D+D and 4 are TA.
Kevin

[kien]

Originally Posted by Red Coral Aquariums

We also carry the D+D Aquascape Epoxy.
Out of 10 Epoxy sales 6 are D+D and 4 are TA.
Kevin

Hmm, I guess I just haven't been looking hard enough. I seem to only notice the Tailor Aquatics stuff I guess They work well enough and come in two colours (although the other guys probably have two colours too). Maybe I'll try the other stuff some time to compare. I seem to go through a lot of epoxy..

[Red Coral Aquariums]

I found the D+D sticks better but takes 3 x longer to dry. I usually leave it out for for 5 min.

[The Grizz]

WOW very very impressive Kien. I have now got it into my head that I will never win TOTM with set up's like this out there. Nice work

[Skimmerking]

No shortage of money in MR reefer's house