kien's 150g Room Divider Mixed Reef & Stuff

[FishyFishy!]

Well for a BM that skimmer has done you well!! Are the air lines clear of salt buildup? Do you know if you can replace the venturi?

Id try to replace the impellor assembly first. Then id think of going new.

Id go vertex or skimz if I had to buy new.

[kien]

Originally Posted by FishyFishy!

Well for a BM that skimmer has done you well!! Are the air lines clear of salt buildup? Do you know if you can replace the venturi?

Id try to replace the impellor assembly first. Then id think of going new.

Id go vertex or skimz if I had to buy new.

Asking Google seems to turn up $120 to $150 replacement needle wheels and none locally. I'd have to order from the US and add shipping and duties etc. That's pricy for a fix that i'm not sure will guarantee a fix to my micro bubble problem.. I have no clue if the venturi is replaceable. Google isn't much help. In fact, there's not a lot of information on this skimmer. Seems people just toss it out

[FishyFishy!]

Eeww. Yeah that dosnt sound feasible.

Sounds like someone's got the upgrade itch! Not that I think you should do that though.......

..........DOOO IIIITTTTT

[kien]

Originally Posted by FishyFishy!

..........DOOO IIIITTTTT

well, at this point I don't seem to have a lot of other options :-)

[Madreefer]

You can't go wrong with the Alpha-cone

[Dez]

I had a skimmer that just didn't seem to be performing the way it used to…. I couldn't figure it out until months later. It ended up being a bit of blockage on the intake side of things that just wasn't visible. It took me figuring it out and I had an "aha" moment and the skimmer resumed it's duties at full force once again. (previous to that I had taken the pump apart, vinegar. Taken the venturi off to clean it and cleaned basically everything else, but the blockage was in the silencer). Hopefully it's a simple fix for you.

[kien]

Originally Posted by Dez

I had a skimmer that just didn't seem to be performing the way it used to…. I couldn't figure it out until months later. It ended up being a bit of blockage on the intake side of things that just wasn't visible. It took me figuring it out and I had an "aha" moment and the skimmer resumed it's duties at full force once again. (previous to that I had taken the pump apart, vinegar. Taken the venturi off to clean it and cleaned basically everything else, but the blockage was in the silencer). Hopefully it's a simple fix for you.

Hmm.. Interesting! Is the silencer that tall pipe that adjusts the water flow ? Is it an air line or water line ?