|  | 
| 
			 
			#2  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   It took me a few times reading it through very very slowly, moching what I needed to do before I totally got the gist. But once I had it down it is fairly simple. 
				__________________ Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build | 
| 
			 
			#3  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Step 1: 3mL of tank water, add drops of A until colour change.  Step 2: 3mL of new water, 5 drops of B, small scoop of purple chrystals, add drops of D until colour change. (I find 99% of the time the magic # is 5 so half the time I skip step 2) Step 3: subtract # of drops in step 2 from # in step 1 and multiply by 50. eg. (32 drops of A) - (5 drops of D) = 27 drops x 50 = 1350 Unless the kit has changed very recently? | 
| 
			 
			#4  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Putting it they way you did Mandosh it does sound very easy but if you miss read  where fase 2 starts & miss the " repete as per point 1.1 " it can be a little confusing. I don't know why they could not have just started fase 2 with a repeat printing of exactly what printed in 1.1. 
				__________________ Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build | 
| 
			 
			#5  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Elos directions are a joke. I just follow the pictures inside the booklet. | 
| 
			 
			#6  
			
			
			
			
			
		 | |||||
| 
 | |||||
|   Damn you must have bought the special package with the prize in it, mine didnt have any pictures. 
				__________________ Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build | 
| 
			 
			#7  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   Use 1.5ml instead of 3ml for your part A and save half your reagent. Multiple by 2.  Part 2 is always the same for me, 5 drops so I don't even bother doing it. | 
| 
			 
			#8  
			
			
			
			
			
		 | ||||
| 
 | ||||
|   +1 on the Part 2 Thanks for the tip for Part 1. I will try that. 
				__________________ 120 gallon, 50 gallon sump, Vertex Illumina 260, Vertex Alpha 200, Vertex UF-20 x 2, Vortech MP60w ES x 2, Eheim 1262, Neptune Apex Controller with PH, Salinity, ORP, Tunze Auto-Top Off, |