![]() |
#1
|
|||||
|
|||||
![]() Hi all, quick question for you... What water do you use for evaporation replacement?
1. RODI 2. RO 3. Tap with Chlorine remover ie. Prime... Thank-you so much in advance... ![]() |
#2
|
|||||
|
|||||
![]() RODI...
__________________
Glass box with stoney stuff and fisches... |
#3
|
||||
|
||||
![]() RO mixed with Kalkwasser until I get it all used up.
|
#4
|
||||
|
||||
![]() ro
__________________
Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built. ![]() |
#5
|
|||||
|
|||||
![]() Leduc<mostly supplied by Edmonton I belive.>
for evap and water changes Tap water, no prime unless i need to do a big change in a hurry or the refil resivoir has been empty a while and lots is going into the tank. LPS growing like snot, sps having problems which may or may not be related. going RO/DI when funds permit. I have tested my water a few times and was getting bottled RO but just gave up on it after a while. I also used to run an aquaclear with carbon and gfo on my water for a few days before i used it but some how that tank ended up filled with rock and water ![]() |
#6
|
|||||
|
|||||
![]() Well I will tell you the reason for the question... my check valve in my RO uint stopped working which allowed the unit to continually push water through and out my waste tube into the drain pipe 24/7 which after checking back utility bills meant $100.00 to $120.00 per month extra on my bill for the last 2 years
![]() Anyway, gotta figure out if I want to continue using it or try the city water with prime... Thanks for your replies and hopefully there will be some that use the city water route then I will not run into this problem again lol. |
#7
|
||||
|
||||
![]() I believe you can go on the city website and they have posted the breakdown of the water contents
|
#8
|
|||||
|
|||||
![]() tap-water and prime! lol
__________________
Flash - Free Agent Fb- edmonton fish coral and hardware buy and sell! |