apex issue

[hfp75]

If you were in Calgary I'd help ya but....

[Nuggs]

If you still can't file the tiles, log on to the device via the internal webpages (by IP address), and Initialize aquabus devices under Configuration -> Misc Setup

[Aquattro]

Might be easier to set it up in the web interface first, then I expect it would show in fusion. I set up fusion after the unit was already configured, so can't say for sure if this is normal or not.

If you type the IP into your browser, you should get the web page

[e46er]

ok so I now have the tiles in the right spot and set them all up for what I want them to control.

changing the off /auto/ on on fusion doesnt power anything.

its a brand new unit.

[Nuggs]

Changing Off / On should switch whatever is plugged into that outlet.

They are 1-4 top row, 5-8 bottom row.

Auto will do nothing unless you have added programming to the outlet.

[e46er]

Originally Posted by Nuggs

Changing Off / On should switch whatever is plugged into that outlet.

They are 1-4 top row, 5-8 bottom row.

Auto will do nothing unless you have added programming to the outlet.

Ive done the programming for dosing pumps return ect but turning all the outlets to on doesnt actually turn on the power to the outlet. you cant hear the mech. relays on 4 and 8 chick.
the status light is solid green and the head unit says off off off off off all the way across.

[e46er]

when i go into manual control on the head unit its also showing all 8 outlets on........