Protein Skimmer and Coral issues

[LoJack]

You can buy a booster pump for under a hundred bucks that will boost that pressure for your RODI and get it working properly again.

[hillegom]

Are you on a well, or city water?
What is the pressure? It should be at least 60psi
If you have that, then your membrane has a hole in it. And your DI filter is depleted. Barring everything else, your DI will bring the TDS down to 0.
Check the TDS of the water coming out of the ro membrane. It should be about 95% less than your tap water.

[Antrias]

Originally Posted by hillegom

Are you on a well, or city water?
What is the pressure? It should be at least 60psi
If you have that, then your membrane has a hole in it. And your DI filter is depleted. Barring everything else, your DI will bring the TDS down to 0.
Check the TDS of the water coming out of the ro membrane. It should be about 95% less than your tap water.

I am on city water - it could be I don't know what i am doing with the unit but i also am sure that the DI resin is depleted now that you mention it. The unit has like a valve at the waste water line that if I keep it mostly closed i get close to 60PSI however if I fully open it i get maybe 20PSI.

[KrazyKuch]

Are you sure your rodi unit is connected properly.....sounds like their is no flow restricter installed or the flush valve is open

[hillegom]

+1
That valve is for flushing the membrane.

[hillegom]

sent u a pm with a diagram and video

[Antrias]

Originally Posted by hillegom

sent u a pm with a diagram and video

I actually found the video very helpful however I have different valve on mine that I might consider throwing out.


Here is my sad candy coral

[Antrias]

Originally Posted by hillegom

sent u a pm with a diagram and video

I actually found the video very helpful however I have different valve on mine that I might consider throwing out.
http://imgur.com/CooXy6z


Here is my sad candy coral
http://imgur.com/2ZAVF9E