Pump suggestions...

[Skimmerking]

Blaine why not just tap into your return line with a john guess fitting and power the reactor that way

[jtbadco]

what return line?

I'm running the reactor as its own closed loop.

I dont have a sump or canister filter

[Skimmerking]

ahhhhhhhhhhhhhhhhhhhh

ok so take a maxi jet 400 and run it with RO line and attach a John guess fitting to it and there you go.

[jtbadco]

See,...I bought a Maxi-Jet 900. Where the connections attach to the motor is really flimsy. Every time I moved one of the 1/2" lines it would pop the top off. I was worried it would leak.

I was looking at the Mag Drive 250 Supreme but I dont think it has adjustable flow. Does that matter? The reactor is a Two Little Fishies 150 and it has a flow rate adjustment knob on the intake line.

[gregzz4]

Have a good browse through J&L's pump selection. They list fitting sizes and head pressures.

FYI, Mag drives create heat, even when run externally, and can be a bit noisy. But, they are less likely to leak than, say, a Quiet One run externally.

I don't have any advice for you on other brands the size you need.

[fishytime]

I would look at the Ehiem compact line of pumps.... very good quality and adjustable......the 1000 or 2000 would probably fit the bill....

[jtbadco]

I was looking at the Eheim Universal 1048 Water Pump.

Any thoughts??