lockrookie's 180g (build #3)

[lockrookie]

Originally Posted by Skimmer King

no one like a quitter go for a Jeff

not gonna quit just needs some liquid encouragment. cant do that til dayare kids leave

[lockrookie]

soooooooooooo i braved it. and this is my result

[cuz]

Not to shabby!!!!!!!! Nice work!!!

Did you cut or score from hole to hole?

[lockrookie]

cut with an angle grinder with a diamond blade the whole process took 15 min to do it all was actually really easy. a little chiping from the diamond blade but all in all im happy

[lockrookie]

here we go again another boring set of pictures of my progress.. i drilled the bottom of the tank minimal chipping (impressed with myself) and attached the rest of the eurobracing the two small end pieces are from the tank just trimmed to size thus why they are smaller than the new bracing..

im undecided if im going to use my 5 mil glass for the overflow or if i should cut up the old 1/2 glass for extra stability. i think 5 mil is too thin and im getting good at cutting the glass so why not build this thing like a tank (pun intended).

anywho here is where the tank is at this time. just movin along

[gregzz4]

Nicely done

[lockrookie]

Originally Posted by gregzz4

Nicely done

thanks im quite happy with it thus far. but i need to buy a new diamond blade regretfully for my angle grinder tried to cut the overflow pieces and failed. chipped.. bady but if i have to i can still use them overflow will be coverd with black acrilic anyways. but today i feel like crap so im holding off

i was just hopeing to do a water test before i had to set it aside for a month... but my colld is kickin my butt atm