|
|
|
|
|
#1
11-21-2011, 01:23 AM
|
||||
|
||||
Snap a couple of pics to show how you have it plumbed now.
|
|
#2
11-21-2011, 01:35 AM
|
|||||
|
|||||
|
I don't see an auto shut-off valve in your photo & the diagram sphelps provided has one of these just to the right of the valve/restrictor assembly. Another photo would help troubleshooting for sure, perhaps a couple showing the system from more than one angle.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build  http://www.canreef.com/vbulletin/showthread.php?t=82206
|
|
#3
11-21-2011, 06:04 AM
|
||||
|
||||
|
Heres another pic. Sorry I didnt get any from more angles. Correct, there is no auto shutoff valve.
Nothing is coming out of the green tube, only the yellow. Im stumped! Red: In Blue: Out Yellow: Waste Green: RO out 
|
|
#4
11-21-2011, 10:33 AM
|
||||
|
||||
|
Chief - you still have it plumbed incorrectly. Look again at the diagram someone posted earlier in this thread. You have the second carbon stage feeding the flow restrictor - it should be feeding the RO membrane.
Also - get rid of the pressurized storage tank if you have one, and get rid of the taste and odor filter that is above the DI resin stage.
|
|
#5
11-21-2011, 03:32 PM
|
|||||
|
|||||
|
Good eye, it's actually evident in your first two photos as well. The flow restrictor/flush valve is supposed to be plumbed into the yellow waste line. The white tubing from the prefilters should go directly to membrane. Looks like you'll need a longer piece for that (or flip the membrane housing into the other direction). This is where the auto shut off valve would normally be plumbed in.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Last edited by mike31154; 11-21-2011 at 03:35 PM.
|
|
#6
11-21-2011, 05:07 PM
|
|||||
|
|||||
 ok lets see if I can help you. first undo the line from #1 and plug it into number #2. unplug the line from #3 and plug it into #5 and the end of the blue line you took out of #5, sould be plugged into #6 take your red line you just removed from #6 and plug it into #1 the line you unpluged from #2 and plug it into #3 make these first and maybe a new pic to clear up the mess  Steve
__________________
 *everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive.
|
|
#8
11-22-2011, 06:10 PM
|
||||
|
||||
|
Ok I will try again. I was just going off what StirCrazy said but maybe I messed up his instructions.
Quote:
|
Hybrid Mode
