Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #1  
Old 07-18-2011, 03:18 PM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

From what I've read here on the forum, you folks on the west coast & the island have very low TDS right out of the tap. Since you're still in the planning stages, probably the best thing to do is spend a little money on a TDS meter and perhaps a pressure guage. Check your tap water TDS & water pressure, then you'll have a better idea of what you need as far as stages etc. If your source TDS is 10 or lower, it may even be more cost effective for you to simply get a large DI stage. This has the advantage that you won't have any waste water as is the case with any RO system. Or you might go with RO and no DI stage. My source TDS is 210 & according to the TDS meter, my 75 gpd membrane gets that down to 1 and even 0 TDS after about 5 minutes of running. More than two years after installing the system I'm still on the original DI media.

After that, most systems regardless of who makes them are made up of more or less generic components. The costly item is the RO membrane and you want to make sure that's a good quality one. 75 gpd units have a better rejection rate than 100 or 150 gpd units. Some of the cheaper systems will have no frills, that is, no TDS meter, pressure guage, auto shut off valve and may have lower quality JG fittings, lousy pre filters & carbon block as well as white pre filter housings vice the clear ones. Expect to pay at least $200 for a decent 4 or 5 stage system. You may be able to get away with a 3 stage (sediment pre filter, carbon, RO) if your source TDS is as low as most folks from the west coast report.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206

Last edited by mike31154; 07-18-2011 at 03:28 PM.
Reply With Quote
  #2  
Old 07-19-2011, 12:47 AM
chopperman chopperman is offline
Member
 
Join Date: Nov 2010
Location: Turner Valley AB (25min. Southwest of Calgary)
Posts: 27
chopperman is on a distinguished road
Default

I just bought a 75gpd 5 stage Plus ro/di unit from bulk reef supply. Seems to be a good unit after a week of use. For the price I didnt think you could go wrong. It comes with auto shut off, dual tds meter, pressure guage and a flush kit. It also comes with the filters. All in including shipping it was 250 bucks
Reply With Quote
  #3  
Old 07-19-2011, 04:21 AM
sully08 sully08 is offline
Member
 
Join Date: Apr 2011
Location: sherwood park
Posts: 86
sully08 is on a distinguished road
Default

Bought a Vertex 100g from J&L works great
Reply With Quote
  #4  
Old 07-19-2011, 04:40 AM
mseepman mseepman is offline
Gold Member
 
Join Date: Aug 2007
Location: Vernon
Posts: 2,529
mseepman is on a distinguished road
Default

I have the five stage from BRS and its been great. Price was great too.
__________________
Mark...



290g Peninsula Display, 425g total volume. Setup Jan 2013.
Reply With Quote
  #5  
Old 07-19-2011, 02:07 PM
gobytron gobytron is offline
Banned
 
Join Date: Apr 2009
Location: Coquitlam, BC
Posts: 1,424
gobytron is an unknown quantity at this point
Default

Go buy one of the simple ones from Aquarium pharmeceuticals...
I've been suing one for 8 years or so now.

You wont find many people who use them in B.C> (where tds in water is generally low) with complaints.

I think they retail for around 50$ with replacement cartridges around 30$.
Reply With Quote
  #6  
Old 07-20-2011, 11:32 PM
Maverick00 Maverick00 is offline
Member
 
Join Date: Mar 2010
Location: Vancouver Island
Posts: 380
Maverick00 is on a distinguished road
Default

awesome... i think im gonna go with the vertex puratek 100, thanks guys
__________________

- 33 Gal - 20Gal Sump, MP10/Hydor Powerheads, Aquaticlife 4x T-5HO, Vertex IN100, TLF w/Biopellets, Tunze ATO

-45GAL Build in Progress!-
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 06:17 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.