![]() |
|
#1
|
|||||
|
|||||
![]() My tank is in the basement on a concrete floor. Hello brute on wheels, I love it. Go for the herbie if you can, I have a stockman (can't fit a durso in there
![]() My tank is in wall and I wish I'd left enough room on the sides for placement of magnets for powerheads (its a very tight fit), I can't move my wavebox forward enough in the tank so its only half held on by the magnets (a bit precarious but so far so good). Sounds like you're set, can't wait to see thie one set up ![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |
#2
|
|||||
|
|||||
![]() This one will be in the livingroom, upstairs, so hopefully it doesn't decide to go downstairs. I'm thinking a 7' wide stand, which gives me edges to sit stuff on and spreads the weight a bit more. I'll probably look at a 75g sump underneath. I lose my downstairs sump, but can probably plumb my topoff in full time, no more jugs!!
Noise will be a concern, so I'll look at the herbie setups, haven't been there before. MAG 12 or so return in sump to dampen vibration, currently my whole house vibrates from the pump downstairs. Christy, I may need a few more frags -lol
__________________
Brad |
#3
|
|||||
|
|||||
![]() +1 on the large water containers.
I wish I had the room for a larger sump. Mine is 70g and I would love the space of a 100g or even 120g.
__________________
225g reef |
#4
|
|||||
|
|||||
![]() Quote:
Large water containers won't fly, I don't have room to store them while not making water. I use a 20g tub now, so that should cover water changes (I hope)
__________________
Brad |
#5
|
|||||
|
|||||
![]() I think that any of use that are over 100 gals have all lost our minds
![]()
__________________
Feed the bear goodies, make a new friend, don't feed the bear............... 8' - 165gal Reef DIY LED's Build 2012 Nano Contest Winner Febuary 2013 POTM Winner 300 gal + 60 gal Complete DIY Build |
#6
|
|||||
|
|||||
![]() Topoff tanka dn mix tank on a high stand right under the living room floor? Plumb into them through a cold air return?
I really approve of the last straw/the first straw mentality. If it IS broke...go bigger! Looking fwd to more. Are you supporting the floor? |
#7
|
|||||
|
|||||
![]() Quote:
I'm not supporting the floor this time around, I did with my 155, and found I didn't need to. This one will be up against a wall, overtop a support wall, probably over a slab where a fireplace used to be. It should be ok.
__________________
Brad |
#8
|
|||||
|
|||||
![]() I'm just reading the link to Beananimal system, not sure how that works yet. For that matter, I don't know how Herbies work either, I've always used stockman style, but they do give off some noise.
I was going to drill the bottom, but coast to coast does sound appealing, although that pushes me out from the wall, which I was trying to avoid. Thoughts on internal vs external plumbing??
__________________
Brad |
#9
|
||||
|
||||
![]() Having that extra space on the side of the tank is great for putting fish stuff on. Very convenient.
Use a herbie or at least durso system. Much quieter. I have glass tops on the 165g and it really reduces my evaporation. Thus I can get away with just a 5 gallon bucket of topoff for the auto topoff system. Easy enough to fill and stick back inside the stand as needed. I find with the glass tops, I only need to top up my ATO bucket once a week or so. My 210g reef, in contrast, evaporates at least 2 or 3 gallons a day. Huge difference. I also love the 24" width of a 90g wide sump, compared to the 18" of a 75g.
__________________
If you see it, can take care of it, better get it or put it on hold. Otherwise, it'll be gone & you'll regret it! |
#10
|
|||||
|
|||||
![]() LOL, I was going to comment earlier. I'll have frags galore for you when you're ready
![]()
__________________
Christy's Reef Blog My 180 Build Every electronic component is shipped with smoke stored deep inside.... only a real genius can find a way to set it free. |