|
|
|
|
|
#1
09-17-2010, 11:04 PM
|
|||||
|
|||||
You want to use IPEX 95 FLEX.
__________________
M2CW 
|
|
#2
09-17-2010, 11:24 PM
|
||||
|
||||
|
I've just used regular PVC cement for the last couple years and it has always worked just fine.
|
|
#3
09-18-2010, 01:34 AM
|
|||||
|
|||||
|
Purple primer and regular PVC glue is all I use.
__________________
Dan Pesonen Umm, a tank or 5
|
|
#4
09-18-2010, 01:49 AM
|
|||||
|
|||||
|
Regular here as well. I've deliberately tried bending and pulling flex hose out of PVC fittings before so that I could re-use one or the other. Its extremely difficult to impossible without breaking something.
__________________
"We shall dive down through black abysses... and in that lair of the Deep Ones we shall dwell amidst wonder and glory forever." - H.P. Lovecraft Old 120gal Tank Journal New 225gal Tank Journal May 2010 TOTM The 10th Annual Prince George Reef Tank Tour
|
|
#5
09-18-2010, 04:49 AM
|
||||
|
||||
|
Thanks for the replies.
From what I have read the special flexible PVC cement is for high pressure applications. Seems that a lot of people have done fine with the regular PVC cement. However I will try the store in North Van as I have had it with plumbing leak nightmares and I don't want to take any chances.
__________________
120 gallon sps/anemones/LPS reef since 2004 Apex controller 8 x 54 watt T5 PowerModule Herbie's silent overflow system Jebao DC 12000 return pump Jecod CP-40 Cross-flow circulation device Mini Bubble King 180 Barr Aquatics calcium reactor Bucket fuge
|
Hybrid Mode
