|
|
|
|
|
#2
09-06-2010, 05:37 PM
|
|||||
|
|||||
You could also try contacting Ecotech customer service directly. They are very helpful in terms of trouble shooting. If it needs replacing then you will likely have to go through a Canadian dealer but if it is fixable they can probably help you.
|
|
#3
09-07-2010, 03:45 AM
|
|||||
|
|||||
|
Check the hardware buy/sell forum, if you're looking for a used MP40W driver (not ES model), I've got a recent post there.
__________________
Mike 77g sumpless SW DIY 10 watt multi-chip LED build  http://www.canreef.com/vbulletin/showthread.php?t=82206
|
|
#4
09-07-2010, 04:43 PM
|
|||||
|
|||||
|
When I had a noisy dry side, I called Ecotech directly... They were great to deal with and sent me a new one and I had it within the week. Even better was that I just had to return the defective one to the LFS where I bought it, so it saved me shipping.
I would give them a call, but before you do, have you tried a reset? Kevin @ Red Coral had one that was supposedly deffectlive, but when I did the reset, voila!!! it was good again. Being that there are no lights, it is probably dead, but you never know.
__________________
 Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk
|
|
#5
09-07-2010, 07:24 PM
|
|||||
|
|||||
|
Well after getting a good fix tip from Bob (Codfather), I have fixed my problem. Seems to be just a loose power cord, thanks for all the tips guys!
|
|
#6
09-08-2010, 03:42 AM
|
|||||
|
|||||
|
Glad it worked, sometimes it's not that simple.
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes.
|
Hybrid Mode
