wet metal halide

[frd72]

just let it dry.i assume the parts that got wet were just the bulb holder or socket and not your ballast. You can use compress air if you want..Just do this with caution, protect your eyes and make sure everything is unplug..

teddy

[mark]

if your talking about just the reflector and not the ballast (external ballast), I'd unplug it and give everything a good rinse with ro/di water, then let dry. Reasoning is would concerned of corrosion from the salt water

[hillegom]

Originally Posted by mark

if your talking about just the reflector and not the ballast (external ballast), i'd unplug it and give everything a good rinse with ro/di water, then let dry. Reasoning is would concerned of corrosion from the salt water

+1