![]() |
|
|
|
#1
|
|||||
|
|||||
|
what are the milled squars for? is that the bottom or the top?
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*Some strive to be perfect.... I just strive. |
|
#2
|
|||||
|
|||||
|
The heatsinks came like that. Probably held some components or something. They are only 1/16 of an inch deep so a few emitters will sit 1/16 inch higher than the rest. I figured 1/16 inch won't make an appreciable difference in PAR and coverage etc. and given the cost savings of the heatsinks vs. something pristine I could live with it. It won't be visible inside the housing anyhow.
|
|
#3
|
|||||
|
|||||
|
Heatsinks cleaned and polished a bit and 80 emitters mounted:
![]() next up, wiring... |
|
#4
|
||||
|
||||
|
tagging along..
looking good so far! |