Silicone cure time?

[whatcaneyedo]

My tube says 24 hours but I doubt you would have any issue with 18 hours.

[justinl]

IMO 24hrs is safe, 48hrs for complete cure.

24 - 48 hrs for useable but it takes up to 7 day for complete curing, but generaly after 48 hrs it is OK for use in saltwater. My self I fill with water after 48 hours and leave for 24hrs then drain and wipe all silicone surfaces you will more than likly have a film on it after this film is removed you can use. The film is from the curing process and if there is no film then cure is done to a depth that it is not leaching out to the surface. I do not atempt to use till it has been cured for atleast 48hrs, I have seen guys kill tanks by rushing things. Remeber the curing time also depends on how heavy it has been put on.

Bill

[GreenSpottedPuffer]

Ok I don't have that much time to let it cure so I will have to work something else out. Thanks.

Anyone know a good product to bond acrylic to..hmmm...not sure what it is exactly but basically just a regular type of plastic? I guess most superglues would work since its plastic to plastic? This would also just be a veneer type thing so not under any pressure or holding water.

[JDigital]

Weld-on 16 works great for acrylics.

[Binare]

If it smells like it aint cured yet... Just remember that.

[GreenSpottedPuffer]

Ok, any reason I would need to use weld on to attach an 1/8" acrylic veneer to a plastic overflow? I kind of thought something like superglue would do the trick since this is just a veneer. No?

How long is the cure time for weld on?

[justinl]

someone corr ect me if I'm wrong, but I believe weld-on has a long cure time... it basically melts plastics together. IMO superglue is your best bet.