|
|
|
|
|
#1
01-14-2010, 05:40 AM
|
|||||
|
|||||
caamera isnt cooperating today to connect, its a regular 20 gallon aquarium with the one baffle and some glass pieces attached to make spots for the eggcrate to slide in sorry but ill get pics as soon as camera will connect to comp
|
|
#2
01-23-2010, 04:52 AM
|
|||||
|
|||||
 this is my current sump plan after doign a bit of researching and your pms i'm thinking this will work lmk what you think. the water comes in the right chamber with the skimmer and gets skimmed. it then straight from the skimmers output gets put into the far left chamber with chaeto in it. the brown lines on the right of the chaeto area are a fine plastic mesh... think of it as really really fine eggcrate. which leads the water finally to a or2500 pump that sends it back up to the tank. the chaeto compartment has a 150w halogen above it. i don't see any major problems in the design but i also have never had a sump before so let me know what you think plz.
|
|
#3
01-23-2010, 05:14 AM
|
|||||
|
|||||
|
Heres a pic of my sump....pretty much exactly what you have sketched up, except the simmer section is the smaller of the two out side sections , bubble trap for the skimmer section and a single tall baffle for the fuge section....
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
|
Hybrid Mode
