![]() |
|
#1
|
|||||
|
|||||
![]() I would check the plugin and cord for bad connections. If that isn't it, I am thinking it is a bad pump.
Is this a new unit, if so, I would get it exchanged under warranty.
__________________
![]() Setup: 180G DT, 105G Refuge (approx. 300lbs LR, 150lbs Aragonite) Hardware: Super Reef Octopus SSS-3000, Tunze ATO, Mag 18 return, 2x MP40W, 2X Koralia 4's Wavemaker Lighting: 5ft Hamilton Belize Sun (2x250W MH, 2X80W T5HO) Type of Aquarium: mixed reef (SPS & LPS) with fish Dosing: Mg, Ca, Alk |
#2
|
||||
|
||||
![]() I bought it used and I am thinking bad pump as well - I will call euro reef on Monday to ask some questions...
what is a good replacement pump? |
#3
|
|||||
|
|||||
![]() did u try cleaning the pump?
__________________
but what the heck do i know |
#4
|
|||||
|
|||||
![]() Ya, try letting the pump soak in white vinegar for a few hours, then re-try.
|
#5
|
||||
|
||||
![]() When I got the pump it was in very dirty condition. The first thing I did was clean it inside and out - she is very clean
![]() if it is a connection thing - I think it is internal because after it runs for 3 mins it stops - this leads me to believe that something is disconnecting once the pump heats up. Once the pump cools off it starts again... what do you guys think? |
#6
|
||||
|
||||
![]() I use a sedra 1200 on my 250
|
#7
|
||||
|
||||
![]() Is that a Sedra 1200 or 12000?
Thanks |
#8
|
||||
|
||||
![]() sorry 12000
|