Quote:
Originally Posted by hillegom
Teeth not good? All the aquariums you buy with built in overflows that I have seen,have slots.
|
Teeth reduce the surface area by 50%, so a 12" overflow is really a 6" overflow. As water passes the teeth the surface tension is broken so you don't skim a quick, thin layer from the surface, but rather more water is drawn from below the surface.
Overflows that have a return line or other flow interfere with the surface tension (flow directed near, or away from the overflow) near the overflow cause it to draw water from lower down. You can do a flake food test on some overflows and see water (& flakes) pulled into the overflow box from straight down. Return lines from the sump should be located at the surface at one end with the overflow box in the opposing end or corner (depending on aesthetics). Centre overflow boxes are less efficient and promote dead spots. Water should flow straight across the surface mixing with old water and flow directly into the overflow box taking with it anything on the surface. This system discourages back siphoning with the sump return and provides superior surface swirl and subsequent ripples if you have metal halide lighting.
Tanks typically come with teeth because aquarium manufacturers don't like change. A single slot is cheaper, stronger and easier to build, but tank manufacturers are slow to change. Most of them still use wet/dry filters oversized drains (allowing air and flushing issues) and one pump systems. In the case of a coast to coast style overflow, teeth make even less sense because the water depth at the edge isn't deep enough to attract fish to swim over it.
10-16-2009, 06:32 AM
Hybrid Mode
