![]() |
|
#1
|
||||
|
||||
![]() No problem. Hopefully I can get the sand in the tank & I'll do an update after the weekend.
|
#2
|
|||||
|
|||||
![]() Actually, I recall the previous owner of that tank had this sand and was running 2 Tunze 6100 pumps and a seaswirl return. His sand stayed mostly where he put it.
__________________
Brad |
#3
|
||||
|
||||
![]() I like it, It has always stayed put for me (135g.,2xTunze 6100's, Dart rtn). I have my Tunze's positioned so one flows across the back and one flows across the front, and they're on the multicontroller so the flow never directly clashes.
|
#4
|
||||
|
||||
![]() The verdict.
I finished adding this CaribSea Reef Grade sand. I added about 60lbs to my standard 120G (48X24X24). I have 2 Tunze 6080's pointed add each other. Return pump is is not a factor compared to the Tunzes. Too be expected there were some small sand tornados and some very minor sand movements. Overall I must say the sand did stay put. Infact it didn't move at all after the first 2-3 minutes. I have no bare spots. I'd highly recommeded. Thanks for everyones input. |