|
|
|
|
|
#1
11-16-2008, 05:30 AM
|
|||||
|
|||||
Hose did not work?
__________________
150 Gal system 3'x3' 400W M/H, Bekett skimmer, Dart return,1/4 HP Chiller 180 Gal Drop tank, LED lights, Bubble master 250 skimmer,Hammerhead on a closed loop, Speed wave return. 
|
|
#2
11-16-2008, 02:15 PM
|
|||||
|
|||||
|
If you need pics of a herbie check out my build thread. The first couple pages are of the plumbing part of my build. http://www.canreef.com/vbulletin/showthread.php?t=40669 . If you need any other pics let me know by pm and I will send them to you.
Doug
__________________
260g mixed reef, 105g sump, water blaster 7000 return, Bubble King SM 300 skimmer, Aqua Controller Jr, 4 radions, 3 Tunze 6055s,1 tunze 6065, 2 Vortech MP40s, Vortech MP20, Tunze ATO, GHL SA2 doser, 2 TLF reactors (1 carbon, 1 rowa). http://www.canreef.com/vbulletin/showthread.php?t=50034 . Tank Video here http://www.vimeo.com/2304609 and here http://www.vimeo.com/16591694
|
|
#3
11-16-2008, 02:28 PM
|
|||||
|
|||||
  This is a general drawing that should hopefully give you the idea. First you can use a 1.5" drain and a 1" drain. I would advise using the 1" drain as the primary and the 1.5" as the secondary (back-up). If you want you can use a standpipe with the secondary line, most people don't but it will keep things quieter if it gets used. You can use any type of standpipe, doesn't have to be an HGB as shown. The siphon tube is not required but will prevent the overflow from draining when the power is cut. The one thing I wouldn't do is tee both drains together at the bottom, keep them separate.
|
Hybrid Mode
