Algae and Fish Food

[Myka]

Originally Posted by Oscar

Myka: You are probably right, adding the fish just brought things out of balance and I will just have to wait for it to settle down again. Weekly haircuts, watching the feeding and phosphate capture should help.

I am currently running Seachem carbon and Phosban in media bags. You appear to be a fan of the Bulk Reef products. Are they more efficient?

I do have a no-name pin wheel skimmer that came as part of the tank package. It has a vague similarity to the Euro-Reef. It is apparently rated for 100G and certainly seems to work well from my limited experience, about 2 cups of green tea per week.

And yes I was just kidding about the

Thanks for the Chaeto and the delivery service.

Ya, the Chaeto should help too (you're welcome!). The quicker you can get it to grow (more light, more light!!), the more phosphate it will suck up.

I haven't tried the BRS carbon. I haven't run carbon in my tank for at least 6 months. I think I might start up again. I never noticed a difference before when I was hit and miss on changing it (which is really bad because once carbon is full it will slowly leech everything back out). In fact, I don't have carbon in any of my tanks. Just a big tub of Kent Reef Carbon! That will be my new experiment...see if adding carbon back (and changing it regularly) will show any changes in my reef.

I don't have any experience with the PhosBan media, but I hear it is quite good. I think RowaPhos is supposed to be comparable, and BRS HC GFO media appears to work a noticable amount better.

See if you can adjust your skimmer to get darker liquid aka running it "dryer".

[Oscar]

Originally Posted by Myka

Ya, the Chaeto should help too (you're welcome!). The quicker you can get it to grow (more light, more light!!), the more phosphate it will suck up.

See if you can adjust your skimmer to get darker liquid aka running it "dryer".

Since the refugium is on the back of the tank and not down below in the stand the light acts as a giant night light. So I took the 9W flourescent out and replaced it with a 5W. Now that I have something to actually "grow" in the fuge I will look at reinstalling the 9W and trying to minimize the light it throws into the rest of the room. Some sort of temporary "shade" should work, actually just focussing more of the 5W bulb into the fuge instead of letting it spill would be a help.

Unfortunately the skimmer has virtually no controls with which to vary the flow. But I think if I increase the outflow pipe that might do it.

[Myka]

I'd try to figure out a way to get the 9w light back on there. If all else fails, and your pH isn't swinging like crazy (not likely) you can light the fuge during the day instead of at night.

Is the skimmer in a sump? If so, try raising and lowering it. That might change the skimmate.

[Oscar]

Originally Posted by Myka

I'd try to figure out a way to get the 9w light back on there. If all else fails, and your pH isn't swinging like crazy (not likely) you can light the fuge during the day instead of at night.

Is the skimmer in a sump? If so, try raising and lowering it. That might change the skimmate.

I will have to track the pH to see if there is any swing through the day. Still trying to get the dKh up, so there might be a bit of a swing yet, but running the light during the day would be nice.

The skimmer is in a sump, chamber 2 in the back of the tank. Raising and lowering was my first trial, but I did not see a lot of difference. I seem to recall reading somewhere that the larger the flow through return, the drier the skimmate. I will have to look for that reference again.

Thanks for the input.

[Myka]

Alkalinity shouldn't be hard to get higher...? Ah yes, I believe that is right (re more flow) for a pinwheel...