![]() |
Algae and Fish Food
After being chastised by Myka :sad: I took the suggestion to start a new thread:
`````````````````````````````````````````````````` ```````` My algae issue was in pretty good shape until I added 2 clowns about 2 months ago (my first fish). Then the hair algae got out of control. I have done a lot of pruning and added Phosan in a media bag. I am guessing that the extra phosphate came from the food. I am currently using: Hikari Marine-S Pellet Food and New Life Spectrum Small Fish Formula Pellet Food. Is there any way of knowing with any certainty the phosphate level of a given food? Is it just a general assumption that all food has a certain level of phosphate? __________________ |
I had a huge algae problem with my old tank. I tried everything, phosphate remover, keeping the lights off for a few days to kill it, sea hares that wouldn't touch the stuff, switching water sources, switching food types, upgrading my skimmer, feeding only once a week, hair algae removal products, basting it with boiling water, etc.
Here is how I finally solved the problem: I would take a small hose (like you get with an air pump) when I did a water change and squeeze the end of it on the hair algae, which would suck the algae up the hose and into my bucket. I kept doing this until the algae was fairly trimmed and then did small water changes everyday. Eventually it went away by doing this. |
Quote:
Did you get a handle on where your phosphate wascoming from? |
Quote:
|
We talked about this a bit early, but to add to the comments on here already...
New live rock can leech phosphates for a long time, which is often the cause of algaes in tanks that are under a year old. The only way to fix that issue is to cure the rock better before adding in the first place, or use phosphate medias hoping to absorb the phosphates before the algae does! :D I think you said you were already giving the HA hair cuts didn't you? That's even better than just sucking on it. When you just siphon on it you're only pulling out the stuff that is dead or already partly compromised. Most tanks do quite well without fish in relation to algae. People who leave their tanks with no fish for awhile notice the algaes as soon as they bring in new fish. The system just has to balance out, and you have to help it by not overfeeding, and getting rid of the excess nutrients before they become an issue. :) Did we talk about your skimmer at all? I don't remember...do you have one? What brand? Quote:
|
Quote:
I am currently running Seachem carbon and Phosban in media bags. You appear to be a fan of the Bulk Reef products. Are they more efficient? I do have a no-name pin wheel skimmer that came as part of the tank package. It has a vague similarity to the Euro-Reef. It is apparently rated for 100G and certainly seems to work well from my limited experience, about 2 cups of green tea per week. And yes I was just kidding about the :sad: Thanks for the Chaeto and the delivery service. :biggrin: |
Quote:
I haven't tried the BRS carbon. I haven't run carbon in my tank for at least 6 months. I think I might start up again. I never noticed a difference before when I was hit and miss on changing it (which is really bad because once carbon is full it will slowly leech everything back out). In fact, I don't have carbon in any of my tanks. Just a big tub of Kent Reef Carbon! :lol: That will be my new experiment...see if adding carbon back (and changing it regularly) will show any changes in my reef. :D I don't have any experience with the PhosBan media, but I hear it is quite good. I think RowaPhos is supposed to be comparable, and BRS HC GFO media appears to work a noticable amount better. See if you can adjust your skimmer to get darker liquid aka running it "dryer". :) |
Quote:
Unfortunately the skimmer has virtually no controls with which to vary the flow. But I think if I increase the outflow pipe that might do it. |
I'd try to figure out a way to get the 9w light back on there. If all else fails, and your pH isn't swinging like crazy (not likely) you can light the fuge during the day instead of at night.
Is the skimmer in a sump? If so, try raising and lowering it. That might change the skimmate. |
Quote:
The skimmer is in a sump, chamber 2 in the back of the tank. Raising and lowering was my first trial, but I did not see a lot of difference. I seem to recall reading somewhere that the larger the flow through return, the drier the skimmate. I will have to look for that reference again. Thanks for the input. |
All times are GMT. The time now is 04:45 AM. |
Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.