calciuum reactor help

adidas · #1 03-03-2008, 06:07 PM

found the problem!

the needle valve and the solenoid were both clogged up, got them all apart now and cleaning them.

Pescador · #2 03-03-2008, 07:29 PM

If they are plugged up it sounds like they might have had water back up into them. Use should have a check valve between the solenoid and reactor I use two cause I haven't found them to be 100% reliable.

adidas · #3 03-03-2008, 10:27 PM

my solenoid and needle valves are toast

fencer · #4 03-03-2008, 11:40 PM

Try immersing the needle valve and valve part of the soleniod with a vinegar soln. Whadda you got to lose

adidas · #5 03-04-2008, 06:32 PM

Quote:

Originally Posted by fencer

Try immersing the needle valve and valve part of the soleniod with a vinegar soln. Whadda you got to lose

we did..it is insanely corroded inside the solenoid. i'm upgrading all new regulator/solenoid etc.