![]() |
|
#1
|
|||||
|
|||||
![]() Quote:
|
#2
|
|||||
|
|||||
![]() Yeah, I understand. Maybe just do the 90's and see how they do, you can always change things around down the road if you want. Just keep them as high as possible maybe then you don't see them as prominently.
__________________
-- Tony My next hobby will be flooding my basement while repeatedly banging my head against a brick wall and tearing up $100 bills. Whee! |
#3
|
|||||
|
|||||
![]() Yeah Im working on keeping them high enough so they will not be seen much but its hard with such a shallow tank! I will also be painting them black with Krylon as well which I think will help because the back of the tank is painted black. We will see...
|
#4
|
|||||
|
|||||
![]() Well I hate how the 45's coming down into the water look. Especially the front ones! Would a "half" closed loop be a waste? Like if I have 6 outlets across the back and then one on either side? I think because the tank is so shallow it would still give more than enough flow in the tank. This tank will be bare bottom, so a few will be pointed at the bottom. I actually think this pump may be too big for this closed loop anyways. I may have to end up downgrading.
|
#5
|
|||||
|
|||||
![]() Since you're still playing around, have you tried to reduce to say 1" then build your manifold fr there with mutiple outlets?
|
#6
|
|||||
|
|||||
![]() Yeah maybe a good Idea. I have 1" PVC already, I would just need a few reducers and T's, 90's and 45's. Might worth a shot at this point.
|
#7
|
|||||
|
|||||
![]() Well I ended up finding really nice sized 1.5" fittings for the outlets. They are all ABS stuff. The ABS is way smaller looking even in the same diameters. I also like using the transition cement for PVC and ABS for some reason! I think it will work well. Should be done tonight and I will post pics.
|