|
|
|
|
|
#3
06-06-2007, 06:08 AM
|
||||
|
||||
@Reefer Bob:
Firmware 3.03 will support temp.-dep. shut off for MH. Yesterday i finished programming of the new dosing pump functions, i think today i can implement the temp.-dep. functions. @himat: The fan controller regulates the RPM of the fan continiously, that means: very hot - very fast, a little to hot - slow, temp. ok - off @Lam's reef: You can look with the program "DeviceInstaller" for the address. But i recommend to assign the address first (then you don't need the DeviceInstaller): You can assign the IP using the keypad of the ProfiLux - under menu extras - communication (please see instructions regarding this). This is possible since firmware 3.02. The IP-assignment is not possible over ProfiLuxControl, it can only be done on ProfiLux directly! 
|
|
#5
06-07-2007, 12:30 AM
|
||||
|
||||
|
An introduction
I thought it was about time I introduced myself on this forum, having just returned from vacation.
I have been working along side Michael from monitors-direct for a good few months now and will be taking over the sales function in the UK. I hope the moderators will be ok with my choice of forum name as our intention is only to promote the use of GHL Profilux globally and will assist in any way we can there is no sales opportunity for me on a Canadian forum purely to help and share information. Just to give you a bit of background, I have been in the aquatics industry for over 18 yrs now, and I have kept some form of aquatic life for 30 odd years! When I finally had a spare unit (as they are selling so fast) I set it up just prior to my vacation... a matter of hours! I can honestly say having used every other controller available in the UK, it is the best and most reliable controller I have used! I have 2500ltrs of frag tanks and set the GHL up in a hurry, just hours before I left home for 10 days. On my return the system is perfect and using an RDP connection I was able to monitor everything and have full control! If there had of been a problem that I couldn't have coped with, then I could have alerted my carer to take any actions necessary!  Just to give you an idea of the just one of my tanks this photo was taken in Dec 2005 shortly after setting it up :  And a similar shot taken earlier this year 01 Feb: (you just don't trust this sort of system to anything but the best!) :  Just to say that all the staghorns in the photo are now growing above the water level despite frequent fragging! I'll try and get some more recent photos posted. Apologies for the long post, but I hope it helps explains my experience and commitment to the product in the interests of the hobby. All the best Steve.
|
|
#7
06-07-2007, 01:12 AM
|
||||
|
||||
|
Quote:
Please bear with us, I can assure you that you will be very happy.... very soon!!! 
|
|
#8
01-14-2008, 09:36 PM
|
||||
|
||||
|
Is it possible now to run a Tunze Wave box in the latest version?
3.0.7.1 21.12.2007 If so how should I program it. In the Extras - pumps Modes or waves
__________________
Best regards from Sweden  380liters DIY Tank DIY 8x39watt T5 (5xCL + 3xFP) , ATI BM 200 grotech 3NG with Grotech 1,2,3 Balling system
|
|
#9
01-14-2008, 09:40 PM
|
|||||
|
|||||
|
Yes it is
here is a copy of a post from another forum Just to start a thread to help Wavebox users discard the Tunze controller that came with it! At least I know the exact resonance value now! haha. I've read someone's tank of 4' with settings 2s Mine is 5' so here's the setup 5ft - 1.6s, 1-10v 0-100% Right Angled Short
|
|
#10
06-08-2007, 09:14 AM
|
||||
|
||||
|
Quote:
can you confirm this above so i can gear up to get the right bits also any simple quides to follow to achive this thanks himat
|
Hybrid Mode
