Asmodeus's 120 gal Mixed reef.

[Skimmerking]

Well I bought some paint. Going to paint all 3 sides glossy black to keep lots of light in and I like the look of Black too. I'm going to have dual overflow Like Doug and Untamed recommended. I have already put on 2 coats of black paint.

here is the first coat.



the first coat is like the primer for the rest. here is the second coat starting to come together and fill in nicely.





as you look at the overflow holes they are for 1" overflows. the overflow box was huge when I like owned it . Im going to make it smaller might just use normal standpipes.. any input..

mike

[crystalz]

The guys at golds aquarium in calgary have a good silent overflow set up. If you call and speak with them they would probabally email u some pics. Having the return ran above the water level and then into the tank is the safest way to pipe it. On mine I ran the return over the overflow. Then I drilled a hole in the 90 on the return and tapped a small plastic threaded barb adapter in to it. I used some small diameter tubing to keep the water from the barb adapter in the overflow. I secured the tubing just above the water level as a siphon break. works like a charm. No more relying on check valves.

[Doug]

Coming along nice Mike. I used a flat black though. Not sure any difference.

If you did straight stacks, the overflow box would be smaller but for sure, more noise. You could build Stockman stacks. Take up very little room, in comparison to Duraso,s.

[Skimmerking]

Here is the bare bones of the stand 3/4" plywood for the top and the bottom. 4x4's on the corners and 2x6 in the middle. it should Hold I'm tthinking of wrapping it with maple plywood or Oak havent decided yet..



the stand is nothing great its what you put on the outside that makes it...