Asmodeus's 120 gal Mixed reef.

littlesilvermax · #1 06-04-2007, 03:59 AM

Quote:

Originally Posted by Gools

Mike, for that size tank I would have gone with at least 1" glass, and a huge centre brace.
I don't thing that gun you fire could break that tank

Skimmerking · #2 06-04-2007, 04:06 AM

Quote:

Originally Posted by littlesilvermax

I don't get it Ben.

Skimmerking · #3 06-04-2007, 04:08 AM

OK I have a question about the top of the stand that im making I have a piece of counter top that is 48 long and 24 wide. and its a nice peice.

the question is can I lay the tank on the top of the counter top with out foam.

littlesilvermax · #4 06-04-2007, 08:48 PM

Quote:

Originally Posted by asmodeus

I don't get it Ben.

Poster above was talking about your guns not breaking the tank, easy subscribe.

Skimmerking · #5 06-04-2007, 09:09 PM

ok seen !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

DanG · #6 06-04-2007, 09:56 PM

I'd still use a thin layer of foam, IMO it's just too dangerous to not.

Skimmerking · #7 06-05-2007, 02:13 AM

Well I'm not going to use the counter top. for the tank to sit on. Im going to use stryofoam and have the ply wood to sit higher then the tank.

More pictures woll follow this weekend probably will finish the stand.

Skimmerking · #8 06-14-2007, 03:50 AM

Well I have the stand made. Its at a friends house now. all I have to do is cut the door for the left side and match it up with the stain.

I hope I can match it up I might make a door for it instead of buying one from home depot..

here is the skimmer I did a leak test on it to test it out and good thing I found a ew leaks in the skimmer in the rgasket on the first flange. and then the gate vlave was leaking too.

but now I have the thing water proof I hope...........

here is the skimmer with the gate valve and a extension this is what I was talking about.

I should have put a union on there I think....

Here is the dual beckett that will work with the MAK 5 and it also has a ozne port too..