Profilux II plus aquarium controller

[Matthias Gross]

Hi to all,

i have a question, complete different topic:
Did anyone think about using a ProfiLux to control a pool?
We can control and measure pH/Temp./..., the control of pumps (filter & current) is possible.
I tried this the last days on my own (small) pool. The pH is measured, pump is switched, even the controlled use of a solar panel with magnet valves is possible (heating of the pool water).

What is your opinion? I am looking forward to your feedback.

[AMP]

QUICKTRONIC DIMMING & DALI Ballasts

http://www.sylvania.com/ProductCatal...hSpecGuide.htm

sorry must have been working on the website

The fifth one down I was curious as to if it would work, without the Module.

The second link is 0-10V built in

[monitors-direct]

Hi all

Finally as promised here is an ENGLISH GHL support website, we finished it this weekend. If you want to submit your own review to this please feel free to do so, and we will try and get it on the site asap

http://www.ghl-profilux.com

You will find all the latest downloads here, and Matthias is to link his site to this one if he has not already done so. This then provides an information website in ENGLISH.

in the next few weeks, we will be adding as promised proline's info to the site to cover the North American/ Canadian side, we will also try and get a link put on to this forum also.

6 weeks tomorrow my family and i move to Ottawa permenantly, my wife going home and me coming, well I have no choice really!!!!

Regards
Michael

[niloc16]

that is awesome. finally a site that we can read. thanks

[monitors-direct]

Well I go and get my permenant residancy from the Canadian high commission in London UK on Thursday, so thought it be nice to offer you guys what is available in the UK

We land on the 11th June EEK!!

Please keep track of the site as it grows, it is still in its infancy.

If someone can point me in the directlion of this boards admin i will get permission for theyre banner tp be put on the site.

Also please send us in your own reviews to get your name in lights, all helps the website, also any helpful tips, hints get arounds. A data base of FAQ will then be built

FTO proline - Please send us your banner asap - cheers

Here to help
Regards
Michael

[AMP]

Michael, Mathias,

Great news from both of you, Seing My German is rustier than a nail, don't figure Anyways would either of you know, I have a Spec on a Ballast I believe will handle the Profilux Dimming directly from the unit I believe without the need for a 0-10V Module. I would like some verification prior to me purchasing these for my Rig, My T'5s arrived today from Europe, and I am somewhat anxious to get te Profilux up and running.

Thanks a Million for any help that you all can provide.

[monitors-direct]

It is hard to answer this without knowing what you have purchased and what the spec is. My knowledge of the dimming side of profiLux is still growing but the following is correct.

The dimming modules LF-ABOX and LBF-AP act as an interface between the light unit dimmable ballasts and the profilux, not only that using the LF-ABOX as the interface this acts as a complete shut off to the lights when the 1-10V line drops to a certain level.

So my answer would be without seeing any specs is that no you will need one of these interfaces. for the sake of a few $$$ i would seriously concider getting the correct spec ballasts from GHL and the interface, I think it will save you more in the long run.

GHL do manufacture high end T5 light bars that already dimmable also, you will have to talk to proline for prices though.

Hope I have got your question correct? if you can supply a bit more info i can help further
Regards
Michael

[albert_dao]

Originally Posted by monitors-direct

Hi all

Finally as promised here is an ENGLISH GHL support website, we finished it this weekend. If you want to submit your own review to this please feel free to do so, and we will try and get it on the site asap

http://www.ghl-profilux.com

You will find all the latest downloads here, and Matthias is to link his site to this one if he has not already done so. This then provides an information website in ENGLISH.

in the next few weeks, we will be adding as promised proline's info to the site to cover the North American/ Canadian side, we will also try and get a link put on to this forum also.

6 weeks tomorrow my family and i move to Ottawa permenantly, my wife going home and me coming, well I have no choice really!!!!

Regards
Michael

Is the site currently down?

[monitors-direct]

Now working still sorting out glitches with the designer!

http://www.ghl-profilux.com/

If anyone wants the ENGLISH WLAN/LAN - email instructions please email me at sales@monitors-direct.co.uk

[zapco98]

Hello Matthias,

I was wondering if there was any chance that within the Profilux software, that we could actually have a "notes" field under the "socket outlet functions". It would be very nice to be able to label within the software what "socket 5, 10, etc" are.

Also - is there any ability to see current status of the plug(on or off)? Like an overview page of which are active at any given time. A list similar to the "socket outlet functions" but in the second column, include "on or off".

If this actually exists, I apologize - I just set this up last night and I am going through the software and I am not seeing it.

Would it at all be possible to provide the API to pull the "measured data" out of the controller? It shouldn't be too hard to use something like perl to probe the controller for that data and to have it keep appending to a file, therefore it would be easier to keep "high" resolution data. Not to mention it would be nice to not have to "save" the data manually - very easy to autogenerate graphs and such ;-)

Eric