Profilux II plus aquarium controller

[AMP]

Mathias,

Thank you so much for that info, I realize Profilux is working with a vendor specifically to creat a Plug and play ballast to conect directly to the Profilux.

As much as I would like to wait for this to happen, it is holding up my project.

I assume from the manual, L1/L2 will go directly to the Module to control the ballast? and I would need a second Module for L3/L4 Do the pigtails IE: connectors come with the module? I have 4T5's I am going to control through the Thermal monitoring, The Halides will only come on for 3 hrs so that is no worry for me.

Great to hear from the Dev on this, better to talk to with you then second parties. Thank you so much for the response. Sorry if my English seems a tad confusing, I have not spoke or read German in many years, so I am pretty slow on reading the PDF

[Matthias Gross]

Hi

the PDF is German & English (2nd page).
One modul can control (dimm and shut off) 2 ballasts (or groups of them) separately. Cable to Profilux is shipped with. If you want to dimm 4 groups independently you need 2 EVG-AP, the second one is connected to L3L4.

[AMP]

Thank you Matthias That answered alot, can't wait to get this up and running

I believe this is the one that is needed for the 0-10v module.
http://dafnwebpd.sylvania.com/idmweb/doccontent.dll?LibraryName=ecomcspd^dafnctpd&Syste mType=2&LogonId=ca3a0accd3cad34fbe4d1e7478086899&D ocId=003678766&Page=1

Or can I utilize this directly from the controller?
http://dafnwebpd.sylvania.com/idmweb/doccontent.dll?LibraryName=ecomcspd^dafnctpd&Syste mType=2&LogonId=ca3a0accd3cad34fbe4d1e7478086899&D ocId=003678769&Page=1

[Matthias Gross]

The links don't work.

But doesn't matter - ANY dimmable ballast with 1-10V-interface can be connected.

[Matthias Gross]

Hi to all,

i have a question, complete different topic:
Did anyone think about using a ProfiLux to control a pool?
We can control and measure pH/Temp./..., the control of pumps (filter & current) is possible.
I tried this the last days on my own (small) pool. The pH is measured, pump is switched, even the controlled use of a solar panel with magnet valves is possible (heating of the pool water).

What is your opinion? I am looking forward to your feedback.

[AMP]

QUICKTRONIC DIMMING & DALI Ballasts

http://www.sylvania.com/ProductCatal...hSpecGuide.htm

sorry must have been working on the website

The fifth one down I was curious as to if it would work, without the Module.

The second link is 0-10V built in

[monitors-direct]

Hi all

Finally as promised here is an ENGLISH GHL support website, we finished it this weekend. If you want to submit your own review to this please feel free to do so, and we will try and get it on the site asap

http://www.ghl-profilux.com

You will find all the latest downloads here, and Matthias is to link his site to this one if he has not already done so. This then provides an information website in ENGLISH.

in the next few weeks, we will be adding as promised proline's info to the site to cover the North American/ Canadian side, we will also try and get a link put on to this forum also.

6 weeks tomorrow my family and i move to Ottawa permenantly, my wife going home and me coming, well I have no choice really!!!!

Regards
Michael