Profilux II plus aquarium controller

[Ginzo]

Hi Matthias,

Can an IP-address be entered on the Profilux even if I don't have the LAN/WLAN card installed on my Profilux ?

I would like to try to connect using a D-Link Wireless USB adapter, that would be plugged into my RS232-to-USB adapter ?

Would this work ?

Thanks,
Ginzo

Originally Posted by Matthias Gross

As promised:
The new firmware & manual 3.02 is available here:
http://www.ghl-kl.de/Produkte/Aquari...LuxII_V302.zip
http://www.ghl-kl.de/Produkte/Aquari...LuxII_V302.pdf

The IP-address can be entered now directly on ProfiLux, please read chapter 3.15.16 Communication. And it is possible to change from ad-hoc to infrastructure-mode (only interesting for WLAN).

The attached photo shows entering an IP on the ProfiLux.

[Matthias Gross]

Hi
@Albert: Not all pumps can be dimmed by the reduction of the voltage (AC-side). It depends on the motor type, the pump-producer can give this information. If the pump is dimmable by reducing the mains voltage you will be able to control the pump with our new dimmable socket - coming soon.
Vortech: I can't promis this feature at the moment.
@Ginzo: That doesn't work. These USB-WLAN adapters are constructed for the PC-side, you can't connect it to ProfiLux. It's the same like connecting a USB-WLAN to a printer or other device - not possible.

[niloc16]

matthias,
question for you. with the new firmware is it possible to control more then 2 tunzes? just today i connected a third tunze to the system using the L1-L2 splitter but i realized that the controller only has the capability now to control 2 current pumps. what i mean by this is 2 of the 3 tunzes now are doing the same function in random mode.