|
|
|
|
|
#1
04-14-2007, 06:37 AM
|
||||
|
||||
Thanks for the feedback!
The connection over internet is no problem, too. I tried this here at home - it works absolutely reliable. These are the steps to establish a connection from somewhere to the ProfiLux at home: - You need a domainname for at home, like www.mydomain.com. You can obtain this at DynDNS for example - Install ProfiLuxControl II on your "remote" PC (eg at work) - Edit the connection-options -> Hostname is now NOT the IP-address of your ProfiLux (eg 192.168.0.169) but your domainname (eg www.mydomain.com). Under "Hostname" are IPs AND domainnames accepted! - configure your router at home: incoming tcp-calls on port 10001 must be redirected to the IP of your ProfiLux (in this example 192.168.0.169) Last edited by Matthias Gross; 04-14-2007 at 06:43 AM. 
|
|
#2
04-15-2007, 02:21 PM
|
||||
|
||||
|
Is anyone using V3.01 or above firmware with Digi plug bars via USB expansion?
|
|
#3
04-15-2007, 03:10 PM
|
||||
|
||||
|
yes, Michael.
Me & most of USA/CD customers. And all customers worldwide with digital powerbars. (some may have still 3.00, others may have 3.02) I think in sum about 300.
|
|
#4
04-15-2007, 06:18 PM
|
||||
|
||||
|
Just wondering if this unit can controll pumps that operate on AC? eg. SEIO's and Koralia's.
Also, what is the compatability between these and the Vortech? Thanks, Albert
__________________
This and that.
|
|
#5
04-15-2007, 07:58 PM
|
|||||
|
|||||
|
hey albert,
i'm not sure on your first question but the about the vortechs, they are currently not able to control the vortechs but i have heard they are discussing the issue with ecotech. sorry thats all the info i got
|
Hybrid Mode
