|
|
|
|
|
#1
03-19-2007, 09:46 PM
|
|||||
|
|||||
Right now I have the two larger ones and two 6100 tunze's on my large tank. I have one of the smaller ones in my sump to prevent crud from settling there and I have the other smaller one in my nano tank.
__________________
32"x32"x20" Cube-ish tank 
|
|
#3
03-19-2007, 11:34 PM
|
|||||
|
|||||
|
The impeller shaft on my first 6025 completely rusted and broke off within a month. It was replaced at the store (thanks, Colby, you rock...woot woot! ok...got carried away). The second nano sometimes has issues restarting right away when unplugged. One time it took me over 100 times unplugging and plugging back in, before it started up. Most of the time, it's ok though.
It works really well, though. Convenient, inconspicuous, etc.
__________________
~Drew 10G Nano * 10G Sump * Deltec MCE 600 Skimmer * JBL Viper 150w MH * Zeovit * Vortech MP40W Millions long for immortality who do not know what to do with themselves on a rainy Sunday afternoon. ~S. Ertz 
|
|
#4
03-19-2007, 11:52 PM
|
|||||
|
|||||
|
I was told the nanostreams cannot be used with a controller, is this true? Is there a way to get around this?
|
|
#5
03-20-2007, 12:06 AM
|
|||||
|
|||||
|
I believe that's right...and I'm not sure there would be any way to get around it.
__________________
~Drew 10G Nano * 10G Sump * Deltec MCE 600 Skimmer * JBL Viper 150w MH * Zeovit * Vortech MP40W Millions long for immortality who do not know what to do with themselves on a rainy Sunday afternoon. ~S. Ertz
|
|
#6
03-20-2007, 12:26 AM
|
|||||
|
|||||
|
cool, thanks for the feedback. Was considering whether the price difference between a nano-stream and a seio was worth it. It seems the nano-stream is a model line-up to compete with the seio for price by providing a little more innovation for a little more money.
__________________
Everything I put in my tank is fully dependant on me.
|
|
#7
03-20-2007, 02:06 AM
|
|||||
|
|||||
|
You can wait until the 6055 Nanostream comes out. That ones controllable.
__________________
32"x32"x20" Cube-ish tank
|
|
#8
03-20-2007, 03:04 AM
|
|||||
|
|||||
|
Check RC - there's some discussion of using the nanostreams and the hydors on the new TAAM wavemaker - apparently it's worked quite well. Doesn't bring the powerheads down to a dead stop, instead adjusting frequency being fed to reduce flow/power. (Read it worked well on the maximod too)
__________________
By reading, replying to, commenting about, or in any way accessing the material in this post; including but not limited to storing in a database, retrieving from a database, viewing in a web browser, including it in or making a reference to it in a legal document, or accidentally glancing at it you agree to send me $100.
|
|
#9
03-20-2007, 03:34 AM
|
|||||
|
|||||
|
Quote:
"They need a long interval of at least 15 minutes to keep a decent service life. They will last longer the less they are switched. It is possible that periodically, especially as they become dirty, that they will run backwards. It is not ideal but within limits, it is possible." the first time i plugged my nanostreams in, one ran backwards. unplugged it...plugged it back in, no problems. i've shut them down only once since then, and both needed a few restarts to run correctly.
|
|
#10
04-16-2007, 06:36 PM
|
|||||
|
|||||
|
The impeller shaft on my SECOND 6025 has just rusted and broke off and is causing a horrible sound. Grrr.
Should I try a third time and hope for better luck? 
__________________
~Drew 10G Nano * 10G Sump * Deltec MCE 600 Skimmer * JBL Viper 150w MH * Zeovit * Vortech MP40W Millions long for immortality who do not know what to do with themselves on a rainy Sunday afternoon. ~S. Ertz
|
Hybrid Mode
