recommend a pump??

[fishface]

Originally Posted by mr_alberta

How is your current ATO setup?

Also, you don't need a monsterous pump, just one with a high pressure rating...unless you want the water to fill up really fast. Check out something along the lines of Iwaki 40RLT or an Iwaki 20RLZT to get an idea. You can get either of those pumps for a pretty good price from time to time on CanReef.

But, if you want a big pump, I know someone who has an Iwaki 100RLT for sale...

RO/DI and FW resevior are downstairs in the garage below my tank and sump. i've got an osmolator pump in the resevoir pumping to my sump (about 3' vertical climb) above, resevoir is almost ceiling height in garage. all run through 1/4" tubing. preferably i'd like to "T" off the feed to the sump and put a valve in so i could feed my change water through the same ATO line.

so no, it doesn't need to be HUGE gallonage per hour but something with good pressure i suppose. needs to go from my garage floor, 1 floor up, say 10'-12" in vertical height.

do the iwaki's have high pressure ratings?

[mr_alberta]

IIRC, the Iwaki 20RLZT has a 21' cutoff.

[niloc16]

i use a gen X 6000 pump the output is reduced 1/2" and using 1/2" vinyl hose it travels up about 10' and it rocks. it will empty about 25 gallons in about 5 minutes. i also use this pump to mix the saltwater as well. i just hook the hose to it when i'm going to do my water change