Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > DIY

Reply
 
Thread Tools Display Modes
  #1  
Old 02-05-2007, 04:09 AM
fishface's Avatar
fishface fishface is offline
Member
 
Join Date: Mar 2005
Location: Surrey
Posts: 488
fishface is on a distinguished road
Default

Quote:
Originally Posted by KrazyKuch View Post
No cause of the pressure you would create on the pump
dang! well thanks anyhow. i suppose i'm just gonna have to make bigger holes in the floor and wall.
__________________
Darryl
Reply With Quote
  #2  
Old 02-05-2007, 04:20 AM
mr_alberta's Avatar
mr_alberta mr_alberta is offline
Member
 
Join Date: Apr 2003
Location: Edmonton, AB (University Area)
Posts: 2,506
mr_alberta is on a distinguished road
Default

How is your current ATO setup?

Also, you don't need a monsterous pump, just one with a high pressure rating...unless you want the water to fill up really fast. Check out something along the lines of Iwaki 40RLT or an Iwaki 20RLZT to get an idea. You can get either of those pumps for a pretty good price from time to time on CanReef.

But, if you want a big pump, I know someone who has an Iwaki 100RLT for sale...
__________________
32"x32"x20" Cube-ish tank
Reply With Quote
  #3  
Old 02-05-2007, 02:10 PM
fishface's Avatar
fishface fishface is offline
Member
 
Join Date: Mar 2005
Location: Surrey
Posts: 488
fishface is on a distinguished road
Default

Quote:
Originally Posted by mr_alberta View Post
How is your current ATO setup?

Also, you don't need a monsterous pump, just one with a high pressure rating...unless you want the water to fill up really fast. Check out something along the lines of Iwaki 40RLT or an Iwaki 20RLZT to get an idea. You can get either of those pumps for a pretty good price from time to time on CanReef.

But, if you want a big pump, I know someone who has an Iwaki 100RLT for sale...
RO/DI and FW resevior are downstairs in the garage below my tank and sump. i've got an osmolator pump in the resevoir pumping to my sump (about 3' vertical climb) above, resevoir is almost ceiling height in garage. all run through 1/4" tubing. preferably i'd like to "T" off the feed to the sump and put a valve in so i could feed my change water through the same ATO line.

so no, it doesn't need to be HUGE gallonage per hour but something with good pressure i suppose. needs to go from my garage floor, 1 floor up, say 10'-12" in vertical height.

do the iwaki's have high pressure ratings?
__________________
Darryl
Reply With Quote
  #4  
Old 02-05-2007, 05:34 PM
mr_alberta's Avatar
mr_alberta mr_alberta is offline
Member
 
Join Date: Apr 2003
Location: Edmonton, AB (University Area)
Posts: 2,506
mr_alberta is on a distinguished road
Default

IIRC, the Iwaki 20RLZT has a 21' cutoff.
__________________
32"x32"x20" Cube-ish tank
Reply With Quote
  #5  
Old 02-05-2007, 09:34 PM
niloc16's Avatar
niloc16 niloc16 is offline
Member
 
Join Date: Mar 2006
Location: mission,bc
Posts: 1,299
niloc16 is on a distinguished road
Default

i use a gen X 6000 pump the output is reduced 1/2" and using 1/2" vinyl hose it travels up about 10' and it rocks. it will empty about 25 gallons in about 5 minutes. i also use this pump to mix the saltwater as well. i just hook the hose to it when i'm going to do my water change
__________________
Colin

my tank setup
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 11:24 AM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.