Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Reef

Reply
 
Thread Tools Display Modes
  #31  
Old 04-23-2009, 04:15 PM
Ron99's Avatar
Ron99 Ron99 is offline
Member
 
Join Date: Dec 2008
Location: South Surrey, BC
Posts: 1,018
Ron99 is on a distinguished road
Default

LEDs are better than either MH or T5. Sorry couldn't resist

But seriously, they are the future for lighting in our hobby. Only problem is up front cost. I am looking at eventually building my own array for my new 65 gallon and it will probably cost me $1100 to $1200 in parts. But that will come down over time as the LEDs get cheaper. Long term benefits are lower energy consumption and no bulb changes as the LEDs should last from 8 to 11 years depending on photoperiod. I'll have PAR as good as a 250W MH with no heat transfer to the tank. With more LEDS and tighter optics you can easily hit 400W MH PAR levels but then the build costs go up too. Final benefit is you can adjust the colour temperature anywhere you want it and the Cree royal blue LEDs generate great Fluorescence in the corals and if you can build and program a controller you can dim them for dawn/dusk or moonlight effects.

Last edited by Ron99; 04-23-2009 at 08:27 PM.
Reply With Quote
  #32  
Old 04-23-2009, 04:31 PM
gobytron gobytron is offline
Banned
 
Join Date: Apr 2009
Location: Coquitlam, BC
Posts: 1,424
gobytron is an unknown quantity at this point
Default

Quote:
Originally Posted by Ron99 View Post
LEDs are better than either MH or T5. Sorry couldn't resist

But seriously, they are the future for lighting in our hobby. Only problem is up front cost. I am looking at eventually building my own array for my new 65 gallon and it will probably cost me $1100 to $1200 in parts. But that will come down over time as the LEDs get cheaper. Long term benefits are lower energy consumption and no bulb changes as the LEDs should last frmo 8 to 11 years depending on photoperiod. I'll have PAR as good as a 250W MH with no heat transfer to the tank. With more LEDS and tighter optics you can easily hit 400W MH PAR levels but then the build costs go up too. Final benefit is you can adjust the colour temperature anywhere you want it and the Cree royal blue LEDs generate great Fluorescence in the corals and if you can build and program a controller you can dim them for dawn/dusk or moonlight effects.
insert head spinning smiley here.
Reply With Quote
  #33  
Old 04-23-2009, 06:43 PM
mark's Avatar
mark mark is offline
Member
 
Join Date: Nov 2002
Location: Edmonton AB
Posts: 4,212
mark is on a distinguished road
Default

LEDs are better than either MH or T5.

LED archaic, go plasma: http://news.cnet.com/1606-2_3-32509.html
Reply With Quote
  #34  
Old 04-23-2009, 07:18 PM
Aquattro's Avatar
Aquattro Aquattro is offline
Just a guy..
 
Join Date: Aug 2001
Location: Victoria, BC
Posts: 18,053
Aquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the roughAquattro is a jewel in the rough
Default

Seriously, if you want light, move south and use solatubes! Or a SPS pond
__________________
Brad
Reply With Quote
  #35  
Old 04-23-2009, 07:19 PM
Ryan's Avatar
Ryan Ryan is offline
Member
 
Join Date: Nov 2004
Location: Lethbridge, AB
Posts: 1,214
Ryan is on a distinguished road
Send a message via MSN to Ryan
Default

Setting up my own Coral reef pool would probably be one of the first things I would do if I liked on the Gulf of Mexico.
Reply With Quote
  #36  
Old 04-23-2009, 07:54 PM
gobytron gobytron is offline
Banned
 
Join Date: Apr 2009
Location: Coquitlam, BC
Posts: 1,424
gobytron is an unknown quantity at this point
Default

speaking of solatubes, here's a link to one of my favorite systems....
uses almost all natural light and is 700 gallons in just the display, this guy actually built his house around his tank and even installed solar panels on his roof to make things a little more economical...
http://forum.marinedepot.com/Topic70159-25-1.aspx
Reply With Quote
  #37  
Old 04-23-2009, 08:29 PM
Ron99's Avatar
Ron99 Ron99 is offline
Member
 
Join Date: Dec 2008
Location: South Surrey, BC
Posts: 1,018
Ron99 is on a distinguished road
Default

Quote:
Originally Posted by mark View Post
LEDs are better than either MH or T5.

LED archaic, go plasma: http://news.cnet.com/1606-2_3-32509.html
I saw this some time ago. It is intriguing. But will probably be a while before anything is commercially available.
Reply With Quote
  #38  
Old 04-23-2009, 10:53 PM
Doug's Avatar
Doug Doug is offline
Rest In Peace
 
Join Date: Aug 2001
Location: Kamloops BC
Posts: 4,920
Doug has disabled reputation
Default

Quote:
Originally Posted by Canadian View Post
Whoops. My mistake. I thought this thread was the one where we make blanket bull$hit erroneous statements about lighting and then other members demonstrate poor critical thinking and regurgitate them while they make absolutely asinine comparisons between different lighting modalities.

Come on guys! Look at my signature and see what kind of lighting I have and what kind of system I run. Use your heads! Look at this thread and see what I have said about T5 lighting in the very recent past: http://canreef.com/vbulletin/showthr...t=51194&page=2

Then go read this thread where some serious BS was spewed and several members gobbled it up and regurgitated it without putting on their "thinking caps" http://canreef.com/vbulletin/showthr...t=51164&page=3

Time and again this stupid comparison is made and people puff up their chests about the superiority of MH lighting all the while completely ignoring the multitude of successful large T5 lit SPS tanks. Many of these large T5 lit SPS tanks are at least 24" deep - so there's your evidence. This BB is, unfortunately, sliding down a slippery slope of pouring out some really bad information of late. I also read posts where members denigrate other sites like RC for various reasons. People need to ensure they get a wider range of views on a topic from other sources before they develop such staunch opinions. There are thousands of SPS dedicated tanks running T5s quite successfully, and several of those are at or around 24" - go look it up somewhere else before your impressionable fledgling hobbyist minds are filled full of BS on this BB.


.. Yea, I was kind of thinking that after. Figured it was the meaning of your post but then one never knows. May have changed your mind. Then I,m thinking, "did he not just order a top end T-5 unit". Hmmm.
__________________
Doug
Reply With Quote
  #39  
Old 04-24-2009, 01:14 AM
StirCrazy's Avatar
StirCrazy StirCrazy is offline
Member
 
Join Date: Oct 2001
Location: Kamloops, BC
Posts: 7,872
StirCrazy is on a distinguished road
Default

Quote:
Originally Posted by Canadian View Post
Whoops. My mistake. I thought this thread was the one where we make blanket bull$hit erroneous statements about lighting and then other members demonstrate poor critical thinking and regurgitate them while they make absolutely asinine comparisons between different lighting modalities.

hey!!! thats my job

Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*

Some strive to be perfect.... I just strive.
Reply With Quote
  #40  
Old 04-24-2009, 01:30 AM
StirCrazy's Avatar
StirCrazy StirCrazy is offline
Member
 
Join Date: Oct 2001
Location: Kamloops, BC
Posts: 7,872
StirCrazy is on a distinguished road
Default

Quote:
Originally Posted by Ron99 View Post
LEDs are better than either MH or T5. Sorry couldn't resist

But seriously, they are the future for lighting in our hobby. Only problem is up front cost. I am looking at eventually building my own array for my new 65 gallon and it will probably cost me $1100 to $1200 in parts. But that will come down over time as the LEDs get cheaper. Long term benefits are lower energy consumption and no bulb changes as the LEDs should last from 8 to 11 years depending on photoperiod. I'll have PAR as good as a 250W MH with no heat transfer to the tank. With more LEDS and tighter optics you can easily hit 400W MH PAR levels but then the build costs go up too. Final benefit is you can adjust the colour temperature anywhere you want it and the Cree royal blue LEDs generate great Fluorescence in the corals and if you can build and program a controller you can dim them for dawn/dusk or moonlight effects.
Ron, have you been to that nano reef tank dot com site, some of the best info I have seen on leds and DIY leds is there, but there are some misconceptions. the first being is that LEDs do creat a whole lot of heat, but it is nopt radiated to the water as you already stated but needs a heat removal system which increases the cost as heat sinks are not cheep. also by saying 250 watt PAR levels or 400 watt PAR levels is not realy true, the largest PAR values I have seen were compared to a DIY probe start ballast SE bulb with no reflector, but to even get close to that one they had to use CREE LEDs (the brightest ones they make) and had to get after market 45degree reflectors and realy tight spacing. not even close to afordable on a large tank as it wasn't afordable on a 10 gal by most people standards. that was also at a fairly close distance, as the LED reflectors seam to have a limited optimization range. I have realy been looking into building an aray, and I have come up with my own ways to save a bit of mony but still for a 28 gal tank I am looking at 48 LED's to get 150wattish levels and 64 LEDs to get what I think would realisticly be 200 wattish levels. so for a price estimate for 64 Cree Leds you are looking at a cost of 1280.00 just for the LEDs, then you need reflectors, which I have see for 5.00 each so another 320.00, now heat sink material.. just a guess at 1 to 200.oo bucks. now you need 1 driver for say every 6 LED's at 32.00 each = 400ish and then misc stuff say 100.00.

so looking at 2300 to get the same or a little less light on a 28 gal as a 250 watt set up with a perfectly seamless coverage and blend of color.

now maybe you have a contact where you can get cree stars for less than 20 each, if so tell me please but after you get them you still need to know how to do plate soldering (which can be done in a oven if you are carfull) Oh I for got the power supply so you can drive the whole system off 110 but only have low voltage at your drivers for saftey. so another 50 to 100.00

Don't get me wrong, I do think LEDs are the way of the future, but in afordability it is a long way off.

Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*

Some strive to be perfect.... I just strive.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 08:46 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.