Quote:
Originally Posted by bvlester
If you have a hot pipe to c then it will not be a cold smoker it will again be a hot smoker. What I was thinking is you can have a hot smoker and a cold smoker in one. To achieve a cold smoker you can not have direct heat . So if you removed the pipe from a to c then you would have a cold smoker, the further away from the originating heat the better..
Bill
|
the hot pipe going up will have a damper in it to shut it off, in the picture it looks like it is short and goes strait up but I will come off the back of the burn box and loop up so I could have two dampers if I wanted and a little longer of a pipe. I am also looking at insulating the bottom of the verticle chamber. for cold smokin I would configure it so it goes through the side into the main body, goes to the end, then back over the top into the other section. I still need to be able to get up to 225 in the verticle section for when I do sausages, but I also need to be able to get down to 90 degrees also for doing cheese and other cold smoked stuff.
Steve
__________________
*everything said above is just my opinion, and may or may not reflect the views of this BBS, its Operators, and its Members. If cornered on any “opinion” I post I will totally deny having ever said this in a Court of Law…Unless I am the right one*
Some strive to be perfect.... I just strive.
01-21-2010, 01:43 PM
Threaded Mode
