|
|
|
||||||||
| Portal | PhotoPost Gallery | Register | Blogs | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
|
|
Thread Tools | Display Modes |
|
#29
04-26-2011, 04:22 PM
|
|||||
|
|||||
I have 65 psi when a 150 gpd flow restrictor is used. If flow is completely blocked there is a little under 70 psi. When water bypasses the flow restrictor through the 1/4" tubing the pressure gauge only reads around 30 psi. Less resistance, less pressure. Yours is probably similar.
 |
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode
