Canreef Aquatics Bulletin Board  

Go Back   Canreef Aquatics Bulletin Board > General > Product Review and Equipment Forum > Filtration and Skimmer Specific

Reply
 
Thread Tools Display Modes
  #1  
Old 12-17-2012, 01:00 AM
Coralgurl's Avatar
Coralgurl Coralgurl is offline
Member
 
Join Date: Aug 2011
Location: Calgary
Posts: 1,894
Coralgurl is on a distinguished road
Default When to change RO filters?

I have had my RO unit for a year now, tds meter is reading 9, guessing its time to change filters?
Reply With Quote
  #2  
Old 12-17-2012, 01:05 AM
kien's Avatar
kien kien is offline
¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.´¯`·.´¯`·.¸¸.·´¯`·.¸¸. ><(((º>
 
Join Date: Apr 2009
Location: Calgary, AB
Posts: 7,665
kien will become famous soon enoughkien will become famous soon enough
Default

I change mine whenever I get a non zero TDS. Ranges from 8 months to a year depending on how heavily I've been using it.
Reply With Quote
  #3  
Old 12-17-2012, 01:36 AM
Coralgurl's Avatar
Coralgurl Coralgurl is offline
Member
 
Join Date: Aug 2011
Location: Calgary
Posts: 1,894
Coralgurl is on a distinguished road
Default

Ya, thinking this is what's causing issues in my tanks ATM...will pick up new ones tomorrow!
Reply With Quote
  #4  
Old 12-17-2012, 04:15 AM
mike31154's Avatar
mike31154 mike31154 is offline
Member
 
Join Date: Jul 2008
Location: Vernon
Posts: 2,073
mike31154 will become famous soon enough
Default

Certainly your output TDS is an indicator, but it also depends on how your system is put together (how many stages, pre filters, rating of the membrane etc), the TDS of your source water & how you run it.

If you have clear pre filter housings you have a visual indicator of how those are doing & being relatively inexpensive, they can be changed more often without worrying whether they are completely clogged or not. The more pressure (within specs) that your membrane sees, the better & clogged pre filters, including the carbon stage(s) all drop the psi before it gets to the membrane.

I use two pressure gauges on my system, one at the source showing house pressure & one at the RO membrane (after the pre filters). Whenever I run the system I keep track of the difference between the two pressure gauges. Once the split rises by a given amount, usually 3-4 psi, I change the first stage pre filter, a 5 micron. I run a 1 micron pre filter after that, followed by the carbon block which is rated for a throughput of thousands of gallons. I only recently changed the carbon black after a couple of years of use. Also keep track of total gallons through the system to give an idea of when the carbon is getting close to it's rated capacity. Just in case, I keep a swimming pool test kit handy that has strips which include chlorine detection.

A few months ago the TDS out of my DI stage started showing 1, so that's when I changed out the DI media & also the carbon block, since it was nearing it's rated thruput. I'm still on the same RO membrane since buying the unit new almost 3 years ago. With 210 TDS tap water, the 75 gpd membrane still gives me 1 TDS out 3-4 minutes after start up.
__________________
Mike
77g sumpless SW
DIY 10 watt multi-chip LED build http://www.canreef.com/vbulletin/showthread.php?t=82206
Reply With Quote
  #5  
Old 12-17-2012, 04:38 AM
Willito's Avatar
Willito Willito is offline
Member
 
Join Date: Nov 2003
Location: Calgary
Posts: 443
Willito is on a distinguished road
Default

Regardless what your TDS is, if you are using this filter system for drinking purposes it is best to at least change it out every six months. Just to be cuatious, the bateria build up on the filters are eliminated this way. If you like the taste of the bateria then just follow your TDS readings.
Reply With Quote
  #6  
Old 12-17-2012, 04:49 AM
Seriak's Avatar
Seriak Seriak is offline
Member
 
Join Date: Jun 2002
Location: Calgary
Posts: 954
Seriak is on a distinguished road
Default

How do you tell when you membrane needs to be changed?
__________________
So many ideas, so little money!
Reply With Quote
  #7  
Old 12-17-2012, 04:54 AM
Coralgurl's Avatar
Coralgurl Coralgurl is offline
Member
 
Join Date: Aug 2011
Location: Calgary
Posts: 1,894
Coralgurl is on a distinguished road
Default

Quote:
Originally Posted by mike31154 View Post
Certainly your output TDS is an indicator, but it also depends on how your system is put together (how many stages, pre filters, rating of the membrane etc), the TDS of your source water & how you run it.

If you have clear pre filter housings you have a visual indicator of how those are doing & being relatively inexpensive, they can be changed more often without worrying whether they are completely clogged or not. The more pressure (within specs) that your membrane sees, the better & clogged pre filters, including the carbon stage(s) all drop the psi before it gets to the membrane.

I use two pressure gauges on my system, one at the source showing house pressure & one at the RO membrane (after the pre filters). Whenever I run the system I keep track of the difference between the two pressure gauges. Once the split rises by a given amount, usually 3-4 psi, I change the first stage pre filter, a 5 micron. I run a 1 micron pre filter after that, followed by the carbon block which is rated for a throughput of thousands of gallons. I only recently changed the carbon black after a couple of years of use. Also keep track of total gallons through the system to give an idea of when the carbon is getting close to it's rated capacity. Just in case, I keep a swimming pool test kit handy that has strips which include chlorine detection.

A few months ago the TDS out of my DI stage started showing 1, so that's when I changed out the DI media & also the carbon block, since it was nearing it's rated thruput. I'm still on the same RO membrane since buying the unit new almost 3 years ago. With 210 TDS tap water, the 75 gpd membrane still gives me 1 TDS out 3-4 minutes after start up.
My water coming in has a tds of 110, my last batch of water going out was at 9. I've got a vertex RO unit, no di. I haven't monitored the gauges at all, it has 2, but I never look at them....as for how the canisters look, I can't see a visible difference but again, probably not paying attention from initial set up.

I've noticed HA growing on my cheato and in my emerg overflow, plus I've I've an outbreak on cyano in my small tank, feeding habits haven't changed so I'm thinking it's my water.

I have not kept track of how much water I've produced but since setting up my 180 in feb, I'm making between 30-60 gls a week, depending on water change schedule.

Quote:
Originally Posted by Willito View Post
Regardless what your TDS is, if you are using this filter system for drinking purposes it is best to at least change it out every six months. Just to be cuatious, the bateria build up on the filters are eliminated this way. If you like the taste of the bateria then just follow your TDS readings.
Our fridge filters water and that's what we use for drinking water.
Reply With Quote
  #8  
Old 12-21-2012, 06:26 AM
Coralgurl's Avatar
Coralgurl Coralgurl is offline
Member
 
Join Date: Aug 2011
Location: Calgary
Posts: 1,894
Coralgurl is on a distinguished road
Default

Changed out the carbon and RO, but didn't grab the prefilter. I'm running the unit anyway to flush the RO membrane, already tds dropped to 3 within minutes. Will grab the prefilter hopefully tomorrow.

Will not let it get this high again.
Reply With Quote
  #9  
Old 12-21-2012, 08:24 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

Quote:
Originally Posted by Coralgurl View Post
Changed out the carbon and RO, but didn't grab the prefilter. I'm running the unit anyway to flush the RO membrane, already tds dropped to 3 within minutes. Will grab the prefilter hopefully tomorrow.

Will not let it get this high again.
Little confused ...
When my RO water started to smell of chlorine, I immediately changed both my filters ... pre-filter and carbon filter
I saw no change in my chlorine smell after new filters ...

I was trying to finish my post before it got wiped out

You can get up to 6 months out of a carbon filter, and 3 years from a RO filter

It all depends on your usage ....

Last edited by gregzz4; 12-21-2012 at 08:32 AM.
Reply With Quote
  #10  
Old 12-21-2012, 09:14 AM
gregzz4's Avatar
gregzz4 gregzz4 is offline
On Hiatus
 
Join Date: Oct 2011
Location: Burnaby, B.C.
Posts: 4,890
gregzz4 will become famous soon enough
Default

So, here's what I've learned ....

You get 3 months out of of your pre-filter, 3 months from your next stage, 6 months out of your carbon filter, and 1-3 years out of your RO membrane (depending who you talk to)

Good thing lots of members give us lots of information so we can gauge our filters ....

When your RO filter turns brown, you should change it;
When pre-filter turns brown, it's time to change it
When a Carbon filter turns black, it's well over-due
C'mon, don't ask when an RO membrane is past due ....
Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump


All times are GMT. The time now is 01:22 PM.


Powered by vBulletin® Version 3.7.3
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.