Need To Borrow Drill Bits - Calgary

[yellowworld]

I need to drill 5 holes in my tank but I dont have the drill bits. I would order them but ill only be using them the once. If anyone could help me out that would be great. If you dont have all the sizes i need that's ok, im sure that I could track them all down eventually. Im willing to go to your place if you want thats fine by me

I need to drill
4 holes for a 1/2" bulkhead so 1-3/8" Hole saw bit
1 hole for a 1-1/2" bulkhead so a 2-1/2" Hole saw bit

[yellowworld]

No one has these sized bits that wouldn't mind helping me out?

[sphelps]

Personally I think you should just buy them, they are cheap if you order them and a good excuse to add or start a collection, plus you'll get the sizes you want.

That said the biggest I have is 60mm, smallest is 42mm. You can borrow them if you want but it's a decent drive out here. They are lightly used but should still work fine, you can also buy them off me with beer to save another trip to bring them back.

[Aquattro]

One issue might be that they're really only good for so many holes, so letting someone else use up 4 holes worth might dissuade someone from loaning it out. I'd maybe try buying a used one for a discounted price..

[Enigma]

Princess Auto has a bunch of different sizes. They're the cheap ones, so they're only good four a few holes, but they should do the job you need done.

Four holes completed wasted my 2 3/8" holesaw.

[Myka]

I've done over 20 holes for 1" bulkheads with my Princess Auto hole saw ($12 I think it was). If no one knows where the "diamond hole saws" are ask for "tile hole saws" instead.