|
|
|
#1
05-20-2012, 01:10 AM
|
|||||
|
|||||
Collection cup stained due to Tunze epoxy ?
All the 'scaping is done, but now this
So how do I clean the stains from my cup ? Do I run it in the sink with vinegar for awhile or what ? 
|
|
#2
05-20-2012, 01:52 AM
|
|||||
|
|||||
|
I won't be surprised with a limited amount of replies this long weekend
|
|
#3
05-20-2012, 06:28 AM
|
|||||
|
|||||
|
No thoughts yet ?
|
|
#4
05-20-2012, 06:46 AM
|
||||
|
||||
|
yup... soak in vinegar solution over the next day or 2, then should come with quite easily.
__________________
150DD mix reef with 90 gal sump and 40gal frag tank purple tang, sohal tang, yellow eye kole tang, fairy wrasse. cleaner wrasse, leopard wrasse, and misc fish. GHL Mitras 6200HV X 2, MP40 X 2, MP60 X 1, tunze 6095 X 2, Vertex RX6 calcium reactor, Bubble King SM250, Aquamaxx bio pellets reactor, Profilux 3
|
|
#5
05-20-2012, 08:19 AM
|
|||||
|
|||||
|
Thanks, I was afraid of that
So, in other words, I have to take it off-line for a day or more to clean it ??? In that case, I may as well run it in a tub of vinegar, right ?
|
|
#6
05-20-2012, 09:00 AM
|
||||
|
||||
|
If you can find it, there is a cleaner called Alconox. It's a white powder that comes in a milk carton like container. Mix 1 spoonful for a gallon of water (not tank water). Should clean the epoxy residue no problem with a bit of a scrub and washes away completely clean. I use it for cleaning serious crap off my glassware in my lab (like stuff that is considered very permanent) but the soap leaves zero residue.
If you can't find it, I can see if I have some left in my lab and I can toss you a bit.
|
|
#7
05-20-2012, 09:06 AM
|
|||||
|
|||||
|
Thanks Steve
I wouldn't have a clue where to find it as on the web all I see are Quebec and Ontario offices What I have for staining is kinda like water marks on glass, ya follow ??? Except for the center of the cup where it's more like the epoxy color I don't want to scrub the cup per se ( possibly scratching it ), but it would be nice to get it back to it's original clear look
|
|
#8
05-20-2012, 01:38 PM
|
|||||
|
|||||
|
Quote:
__________________
|
|
#9
05-21-2012, 08:06 PM
|
|||||
|
|||||
|
Don't get me wrong
I expect it to be all ugly dirty, but what's on the cup right now has stained it I bought it used and it was still clear then
|
|
#10
05-24-2012, 06:48 AM
|
|||||
|
|||||
|
This may not be the best solution ... you have been warned
Well, yesterday I got all crazy with the collection cup and got it clean
What was on the inside of it was epoxy residue and I feel it was restricting it's function. I couldn't slide a wet finger over it due to how sticky it was So, I cringed a little and cleaned it out with isopropyl alcohol. Then I washed it really well with vinegar, and finally water It's working great now. Bubbles are rising and I can clean it out without scrubbing I DONT recommend this as a solution for you all as it's really hard on the acrylic
|
Linear Mode
