![]() |
#1
|
|||||
|
|||||
![]() So I decided to go with tunze powerheads for my 230G set up. I am wondering what pumps to use other then the wavemaker. I would like to create some wave action for softies and LPS. my return pump is a Sedra 2000. any suggestion will be appretiated. I would like to keep the cost at about $300 range. thanks
Abe
__________________
230G, 3 X 250w MH , 4x 39w t5 , about 200lbs of LR, 2" of LS bed, 2 maroon clowns hosting a RLTA, 1 regal tang and 1 yellow tang, 1 blonde neso tang, 1 coral beauty, 2 scunk clowns hosting a GBTA, 1 midas blenny, and a mandarin gopy, 6 blue green chromis and 1 six line wrass. |
#2
|
|||||
|
|||||
![]() The JBJ pumps and wavemakers have been making a wave (no pump intented). They have a kit with wavemaker control and dual 1600gph pumps at right around $120 CDN.
2 kits would be great for your set-up. LMK if you need more info on these. |
#3
|
|||||
|
|||||
![]() You could use a couple of Tunze 6095 or 6105 on the multi controller (or branch them off of the single controller). I think one on each side of the tank would work nicely for you.
Another nice setup would be the smaller 6055, but 4 of them, one in each corner and with a multi controller. That would give you some good flow throughout the tank.
__________________
32"x32"x20" Cube-ish tank |
#4
|
|||||
|
|||||
![]() Abe,
I have a 7095 multi controller that I will not be using if your interested, let me know, I'll give you a good deal. Bob
__________________
There's plenty of room for all God's creatures. Right next to the mashed potatoes. |