![]() |
|
#1
|
||||
|
||||
![]() Current parameters
PH - 8-8.2 Ammonia - 0 Nitrate - 0 Nitrate - 0 Phosphate - 0 maybe trace. can't tell with this damn color card. Calcum - 700+ 2x 250 watt 10K phoenix halides on for about 8 hours. actinics on for around 12-14. I have noticed that the algae I have (I think I got hair, turf, bryopsis, bubble and red bubble) the green ones are turning light green in patches and fading. but some patches are still going strong. Manual removal is really hard because it's so dug into the rock, the rock is actually coming apart. I have chaeto in a fuge, and an army of margarita and cerith snails. Any other snail I find dies way too quickly. Oh and a small urchin in there. I have a crocea clam, a bunch of Smal SPS', 2 large hammer colonies, a lot of xenia and a gbta. what's the minimum amount of light I can give them? |
#2
|
||||
|
||||
![]() 8 hours would be fine
__________________
Back in the saddle again . running a borrowed 65G peninsula while i get my 48"x48" centre overflow cube built. ![]() |
#3
|
||||
|
||||
![]() tap water or RO/DI water?
|
#4
|
|||||
|
|||||
![]() whats your mg at? raising mg can help in control of algae
__________________
180 gallon LPS dominated reef |
#5
|
||||
|
||||
![]() RO water, no DI.
my TDS says 0 so I don't see a need for DI. Actually can someone explain if DI does anything to water with 0 TDS? mg is at 1400 or so. I read that too and boosted it up but I've only done that the last 2 weeks so I don't expect to see results from that yet. |
#6
|
|||||
|
|||||
![]() Whats your stocking like , how old are your bulbs, how much flow do you have, how much do you feed, how much rock and sand do you have and are you using a mechanical filter? You are not going to get a phosphate reading because all the algae is eating it up so there is none left to check. Why is your calcium at 700+?
__________________
360 gallon sps reef, 180 gal sump, bubble king supermarine 300, 4xmp40Wes, 2 x 6215 tunze waveboxes, 4 ghl mitras 360 Reef Tank |