VorTech MP40W Driver Vernon SOLD

mike31154 · #1 09-06-2010, 02:03 AM

I have one MP40W driver left up for grabs for $30. I upgraded to the ES models a few months ago. It has the latest Gen 2 firmware loaded, so that means night mode, long pulse and a few other features. If you'd like to upgrade your MP20 this is a good start, although you'll need a power supply with the driver to upgrade.

Here's a photo to avoid confusion as to what's for sale. One driver shown with the cover off. You'll need to transfer the dry side pump cable from your existing MP20 driver to this driver. And you'll need a 24 VDC, 2.5A power supply.

mike31154 · #2 09-07-2010, 08:43 PM

Still available, shipping is not a problem.

mike31154 · #3 09-12-2010, 03:38 PM

Mmmm, wireless, no one itching to upgrade their MP20's??

mike31154 · #4 10-04-2010, 11:39 PM

Drivers, drivers, get 'em while they're hot, wireless and funky

mike31154 · #5 10-15-2010, 04:30 PM

Check the price, these are a steal....

frd72 · #6 10-15-2010, 05:52 PM

Quote:

Originally Posted by mike31154

I have two MP40W drivers up for grabs, I upgraded to the ES models a few months ago. One is a couple of years old, the other about a year. They both have the latest Gen 2 firmware loaded, so that means night mode, long pulse and a few other features. $30 each or $50 for both. If you'd like to upgrade your MP20 this is a good start, although you'll need a power supply with the driver to upgrade.

Please educate me more of these, you are selling MP 40W drivers but i still need power supply with driver?

Are you selling just the pump not the driver? Thanks..

mike31154 · #7 10-15-2010, 06:57 PM

Quote:

Originally Posted by frd72

Please educate me more of these, you are selling MP 40W drivers but i still need power supply with driver?

Are you selling just the pump not the driver? Thanks..

I'm selling the drivers only, not the pumps. These will be useful to anyone who currently owns an MP20 pump and driver, or an older, non wireless capable MP40 pump and driver. If upgrading from MP20 to MP40W using the drivers I have for sale, the buyer will also need a larger power supply than the one that comes with an MP20. I doubt there are many folks out there still using older MP40 (pre wireless) drivers, so the target buyers here will be mainly MP20 owners who wish to get more power and options with these drivers. HTH.

mike31154 · #8 10-19-2010, 05:46 AM

Don't be shy all you MP20 owners.... you don't need to run your newly upgraded gizmo at full power, can always dial it back.....

mike31154 · #9 10-24-2010, 05:29 PM

MP20 flow specs - 500 to 2,000 gallons of flow per hour

Upgrade to MP40W drivers - 1,000 to 3,200 gallons of flow per hour.......plus the flexibility & options that come with wireless capability....

If you're worried your system is too small, run it at idle, you'll hardly hear it...

...or use the driver as a spare in case your existing one gets wet... or damaged.

mike31154 · #10 10-31-2010, 02:19 AM

Sold one, so there's only one remaining. $30 is hard to beat. Haven't seen one offered for that price.