SPS Temporary Holding Bin

Ryan · #1 08-28-2009, 04:01 AM

I have some across a really good deal on some good size SPS and LPS. The only catch is I have to take all of it because the guy doesnt want to part out. There is 50+ pieces and the smallest one is the size of a baseball so there are some big pieces. The problem I have run into is #1 my tank isnt near big enough to house all these and #2 I dont want most of them because they are either duplicates or dont appeal to me.

So here is my plan. I am going to set up 2 or 3 Sterilite totes with the latching lids. I have some already that have a rectangular hole cut in them so there is about 4-6" of lid left all the way around (I housed my SW this way for a month while I was moving). This will stop the Sterilite from bowing out and help hold its shape. Now I know they are going to need flow so I am thinking a Koralia in each tote along with a heater. I was thinking of plumbing them all together and using a canistar filter (Fluval 304) for the biological and carbon. It will pull from one tote and discharge into the other making the water circulate. This will have been running on an established system for months before going into the tote.

My biggest worry is lighting. With these totes side by side will 1 250W HQI MH be enough (These totes are just under 36" long) to light both totes efficiently enough to keep the SPS alive? I am quiet confident that these SPS will sell really fast but I want to make sure that I can keep them for up to a month if needed.

As stuff sells I will move whats left into the other totes obviously so eventually I am down to 1 then none. I cant see it being more than 2 of these totes.

So will this work or am I setting myself up for disaster? If it is wrong how should it be done right to make it work.

Sebae again · #2 08-28-2009, 04:33 AM

I would say one light per tote otherwise you will be trying to sell brown acros.

Ryan · #3 08-28-2009, 04:35 AM

Not disagreeing with you Sebea but 2 totes wide is the same as 1 tote long. I forgot to mention that.

banditpowdercoat · #4 08-28-2009, 05:37 AM

Still, 2 totes wide, but with teh rim of the lid blocking the light in the center, the corals wont get much light at all. maybe SPS in one tote, with MH above it, then some T5 or PC above the other tote with the LPS?

BlueAbyss · #5 08-28-2009, 07:10 AM

Hmm, I'd almost +1 this unless you are sure they will sell in a week or two (in which time they will brown out most definitely). And specially if they are in a darker colored Rubbermaid... if they are white, maybe not.

Ryan · #6 08-28-2009, 01:07 PM

Quote:

Originally Posted by banditpowdercoat

Still, 2 totes wide, but with teh rim of the lid blocking the light in the center, the corals wont get much light at all. maybe SPS in one tote, with MH above it, then some T5 or PC above the other tote with the LPS?

Good point. My other thought would be using one of these instead.
http://www.walmart.ca/servletimagedo...&imageid=67314

Most of the LPS I want so its going to be 90% SPS.

Myka · #7 08-28-2009, 01:39 PM

If I were you I would just find a used tank in the classifieds. Since it doesn't have to be pretty I'm sure you could find a scratched up one for cheap. Either way I think you will have a bunch of brown SPS...they don't take to handling very well.

Quote:

Originally Posted by banditpowdercoat

Still, 2 totes wide, but with teh rim of the lid blocking the light in the center, the corals wont get much light at all. maybe SPS in one tote, with MH above it, then some T5 or PC above the other tote with the LPS?

Good call.

cuz · #8 08-28-2009, 02:21 PM

I've got a 29 gallon you could "borrow" if you needed it for a bit.