|
|
|
#1
06-21-2008, 03:56 PM
|
|||||
|
|||||
UV sterilizer? when how long?
OK, got my Jebo 18W UV hooked up to my 45g. Wondering how often you use it?? I also plumbed it in series with my Phosban reactor, Thats ok, right?
__________________
Dan Pesonen Umm, a tank or 5 
|
|
#2
06-21-2008, 04:13 PM
|
|||||
|
|||||
|
I too have my UV plumbed into my phosban reactor as phos media and UV's usually require around the same flow rate.
I run my UV 24 hours a day when I introduce a new fish, and then hardly ever after that unless my fish get stressed out or if I have a fish that is particularily prone to ich.
__________________
Do or do not....there is no try.
|
|
#3
06-21-2008, 04:28 PM
|
|||||
|
|||||
|
I do the same as Stones. I turn it on when I get a new fish then ,if needed, I set my timer to turn on the uv once the tank lights go out, then off when they come back on about 12h on & 12h off. I like the night cycle because the main lights are off & there isnt extra heat added to the water at the same time with lights on. If you get my drift!!!! Thats the only time I use mine is when adding new livestock. I have mine plumbed off my return (dart pump) with a valve to control flow then back to sump.
__________________
Dont touch it, you'll break it!!!
|
|
#6
06-26-2008, 03:44 PM
|
||||
|
||||
|
Yup, i run mine 24/7
|
|
#7
06-26-2008, 04:04 PM
|
||||
|
||||
|
Mine is hooked up to my day cycle, and plumbed inline to the carbon reactor and zeolites both in phosban reactors...Hey when the suns out, so is the uv! Not recommended for the zeolites, but i figure the down time is sufficient enough. UV's keep bacterial populations around natural seawater, as their is a trend in aquariums to have higher than normal levels. among other things....
__________________
 65g/20g reef system, Euro RS-80, 2x tunze 6055, mod 6025, mag7, 250 HQI w/192 actinics, 100 lbs. LR 46g FOWLR
|
Linear Mode
