![]() |
#1
|
||||
|
||||
![]() Decided to post up the progress of my build. Wanted your thoughts on it.
![]() 1st off, here's the plan of the tanks and stand. ![]() ![]() Here's the tank and stand setup. The tank is a custom size. Gives me about 90 gallons. I like the added height and depth it has, which is why I went this route. I put about 2" of sand in there. ![]() The sand I put has a diameter of .5 - 1.5 mm, which is a nice size grain. I personally like it more than the thicker grains. ![]() Finally, here's the sump. Sump size is 22 wide, 20 deep, and 18 high. The middle area will be setup as a fuge. Has a 7" sandbed. The return pump is a mag 9.5, (950 gph). I added a T, with a return back to the sump, so I can regulate flow to the main tank without restricting the water output from the pump. Thats as far as I got so far, Any thoughts, suggestions, criticism? Thanks |