![]() |
#1
|
|||||
|
|||||
![]() It is a DIY retro 175w 20k XM bulb, going over a 20g standard size tank. There is no glass or aycrilic between the light and the water. How far should the light be placed above the surface of the water? I'm thinking 12"-16". Does this sound about right?
thanks
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
#2
|
|||||
|
|||||
![]() I believe that the light is usuall 6" - 8" above the surface of the water.
__________________
32"x32"x20" Cube-ish tank |
#3
|
|||||
|
|||||
![]() water splashing on a hot bulb...
|
#4
|
|||||
|
|||||
![]() I have mine about 5" from the water, haven't had any mishaps yet...knock knock.
__________________
a tout le monde, a tous les amis. je vous aime, je dois partir. |
#5
|
|||||
|
|||||
![]() I run mine about 8 inches off the water.
__________________
Brad |
#6
|
|||||
|
|||||
![]() with all that flow ? and no splash...I find that hard to believe.
I run my DE shielded fixtures at least 8-10" and have to clean the splash. I guess I must have surface flow.
__________________
http://www.canreef.com/ftotm/sept05/index.php |
#7
|
|||||
|
|||||
![]() Quote:
__________________
Brad |
#8
|
|||||
|
|||||
![]() Quote:
Steve
__________________
![]() Some strive to be perfect.... I just strive. |
#9
|
|||||
|
|||||
![]() Thankyou everyone. I will go with 8"
![]()
__________________
Marty 50g reef, bubble king skimmer,20g sump,zeovit system, PM cal reactor |
#10
|
|||||
|
|||||
![]() Quote:
__________________
Murray I reserve the right to hijack any thread I want to!! My carbon footprint is bigger than your carbon footprint !!!! |