|
|
|
|
|
#1
05-12-2005, 05:48 PM
|
||||
|
||||
moon lights
does the color matter on moonlights . i found some that come in white ,blue and red . id think u would want blue over the outhers?
|
|
#3
05-13-2005, 03:10 PM
|
|||||
|
|||||
|
Here is a quote from a moonlight place:
The wavelength of the moon is NOT 470 nanometers (blue) as you may have read elsewhere. The moon reflects the light of the Sun, so it really contains all the colors (white to us). Blue is color the light should be at the depths of the reef. Water is very good at absorbing the higher end (red) of the visible light spectrum (550 nanometers and up). However, water is not as good at absorbing the lower end of the spectrum, where the blue light resides. So at these lower depths, only the blue end remains. This is the reason that blue LEDs, in the 470 nanometer range, are used in most moon lights. We spend so much time trying to duplicate the ocean reefs I figure why not with the moonlights too. Hope this helps
__________________
Richard _______________________________________ My wife believed me when I told her it was only going to cost about $500.00. that was over two years ago and I'm still grounded..... 
|
|
#4
05-14-2005, 01:58 AM
|
||||
|
||||
|
iv have now seen the whites and blue on the tank and the white is white all the way through the tank ? i guess im confused to many choices
 . i was also readind that u want a 1000 to 1 ratio for moon lights ie..1000w main light to 1 watt moon light , sounds right?
|
|
#5
05-14-2005, 03:24 AM
|
|||||
|
|||||
|
What I love about that is they don't ever want to try and guess what the wavelength (range) of 'the moon' is at depth.
Don't worry about watts of moonlighting - that's totally irrelevant. Look instead for what sort of coverage you want. I find a 4 foot tank starts to look too glowy after 3 LEDs - even a single LED looks good, and you don't have to worry about geometry. Having the lights places at mathematically precise intervals isn't always "right" - when I built the moonlights on my planted tank I used 7 LEDs and 5 of them were on the left side of the tank.. It gave a nice light gradient and several of the fish stayed under it whereas other avoided it completely.
|
|
#6
05-14-2005, 05:04 AM
|
||||
|
||||
|
so stick with the blue ones
i guess .
|
|
#7
05-25-2005, 05:17 PM
|
|||||
|
|||||
|
reply
When I get mine I'm going to aim it diagonally across the tank to try and simulate and moonrise or moonset.
__________________
THE BARQUARIUM: 55 gallon cube - 50 lbs LR - ASM G3 skimmer - 30 Gallon sump - 22 Gallon refugium / frag tank - 4x 24 watt HO T5's - Mag 9.5 return - Pin Point PH monitor - 400 watt XM 20K MH in Lumenarc reflector - Dual stage GFO/NO3 media reactor - 6 stage RODI auto top up -Wavemaster Pro running 3 Koralia 2's. Fully stocked with fish, corals and usually some fine scotch http://www.canreef.com/vbulletin/showthread.php?t=55041
|
|
#8
05-25-2005, 10:02 PM
|
|||||
|
|||||
|
why are some people starting to use the UV leds?
Its almost a purple I think.
__________________
If it is just us, It seems like an awful waste of space.
|
Hybrid Mode
